- Home
- Products
-
DOWNLOAD DATA SHEET
Series 1 | Omnithane
- Uses Primer and/or Block Fillers
- For Steel, Other, Ductile Iron, Pipes & Fittings
- Generic Description Modified Aromatic Polyurethane Primer
A single component, moisture-cured resin, containing a proprietary blend of micaceous iron oxide and zinc to function as a primer which is field and shop friendly. May be used in OEM manufacturing, potable water and wastewater immersion with the proper topcoats. May also be used for marginally prepared rusty steel and tightly adhering old coatings for non-immersion maintenance situations.
-
DOWNLOAD DATA SHEET
Series 2HS | Low VOC Tneme-Gloss
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Alkyd
- Finish Gloss
A low VOC, high solids, high gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.
-
DOWNLOAD DATA SHEET
Series V10 | Tnemec Primers
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Modified Alkyd
Chemically active, rust-inhibitive primer for ferrous metals. This low VOC primer provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.
-
Series 20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Industry standard for potable water epoxy coatings for nearly 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for its benchmark performance.
-
Series FC20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Fast-curing protective coating for use in steel and concrete structures. Contact your Tnemec representative for other systems and additional information on potential uses.
-
DOWNLOAD DATA SHEET
Series 21 | Epoxoline
- For Steel, Concrete, Other
- Generic Description Phenalkamine Epoxy
High solids, immersion-grade coating offering exceptional build per coat for long-term corrosion resistance. For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment, as well as other steel and concrete substrates. Specially formulated to meet the latest requirements for use in potable water applications.
-
DOWNLOAD DATA SHEET
Series 27 | F.C. Typoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For Steel, Other
- Generic Description Polyamide Epoxy
- Finish Flat
Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.
-
Series 27WB | Typoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Inorganic Hybrid Water-Based Epoxy
- Finish Satin
- This product has been discontinued. Please contact your local sales representative for further assistance.
A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid handling properties. Series 27WB exhibits low yellowing and good color stability in whites and light tone colors. Formula protected under U.S. patent.
-
DOWNLOAD DATA SHEET
Series 37H | Chem-Prime H.S.
- Uses Primer and/or Block Fillers
- For Steel, Other, Ductile Iron, Pipes & Fittings
- Generic Description Phenolic Alkyd
Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications. Note: Not recommended for immersion.
-
DOWNLOAD DATA SHEET
Series 43-36 | Chrome Aluminum
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Alkyd Aluminum
- Finish Low sheen
Metallic aluminum finish for protection against weather, heat and mild industrial fumes. Used on primed or previously-painted carbon and galvanized steel: tank exteriors, piping, equipment and structures. Not for immersion service.
-
DOWNLOAD DATA SHEET
Series 46H-413 | Hi-Build Tneme-Tar
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy-Coal Tar
- Finish Semi-gloss
High-build corrosion resistant coating providing one coat protection for concrete and steel in a variety of chemical, immersion and underground conditions. Also, when a two-coat application is desired, a low film build option is possible.
-
DOWNLOAD DATA SHEET
Series 66 | Hi-Build Epoxoline
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Industry standard for epoxy coatings for over 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.
-
Series 66HS | Hi-Build Epoxoline
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Product is made to order for specific projects. Contact your Tnemec Representative for additional information.
A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.
-
DOWNLOAD DATA SHEET
Series L69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
A versatile, low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized, or distilled water. Can serve as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series L69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.
-
DOWNLOAD DATA SHEET
Series N69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
-
DOWNLOAD DATA SHEET
Series N69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series V69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
-
DOWNLOAD DATA SHEET
Series V69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series 73 | Endura-Shield
- Uses Intermediate Coats, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
A coating for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
-
DOWNLOAD DATA SHEET
Series 108 | ProBond
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Concrete, Other
- Generic Description Low Stress Penetrating Epoxy Sealer
- Finish High-gloss
Series 108 ProBond is a thin-film, low-stress, epoxy designed to adhere to a multitude of substrates, including old finishes, and is frequently used as an overcoating primer. Series 108 is solvent-free and is applied at a low film thickness to reduce stress and weight on old tightly adhered coatings creating a foundation to accept high-performance epoxy and polyurethane finishes. Also used, when specified, as the primer under Lavacrete polymer concrete epoxy toppings. NOT FOR IMMERSION SERVICE. Formerly Series 3600 ProBond. Note: Adhesion analysis of old finishes and test patches are recommended before overcoating a structure. Reference the latest version of Tnemec Technical Bulletin 98-10 for more information.
-
DOWNLOAD DATA SHEET
Series 109 | ProBond
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Concrete, Other
- Generic Description Low Stress Penetrating Epoxy Sealer
- Finish High-gloss
Series 109 ProBond is a lower-temperature curing, thin-film, low-stress, epoxy designed to adhere to a multitude of substrates, including old finishes, and is frequently used as an overcoating primer. Series 109 is solvent-free and is applied at a low film thickness to reduce stress and weight on old tightly adhered coatings creating a foundation to accept high-performance epoxy and polyurethane finishes. Also used, when specified, as the primer under Lavacrete polymer concrete epoxy toppings. Note: Adhesion analysis of old finishes and test patches are recommended before overcoating a structure. Reference the latest version of Tnemec Technical Bulletin 98-10 for more information.
-
DOWNLOAD DATA SHEET
Series 113 | H.B. Tneme-Tufcoat
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Epoxy
- Finish Satin
High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
-
DOWNLOAD DATA SHEET
Series 114 | H.B. Tneme-Tufcoat
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Epoxy
- Finish Gloss
High performance gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
-
DOWNLOAD DATA SHEET
Series 115 | Uni-Bond DF
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Self-crosslinking Hydrophobic Acrylic
- Finish Eggshell
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series V115 | Uni-Bond DF
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Self-crosslinking Hydrophobic Acrylic
- Finish Eggshell
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 118 | Uni-Bond Mastic
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Mastic Waterborne Acrylic
- Finish Matte
A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.
-
DOWNLOAD DATA SHEET
Series 135 | Chembuild
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Modified Polyamidoamine Epoxy
- Finish Semi-gloss
High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series N140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series N140F | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
-
Series V140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.
-
Series V140F | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series 151-1051 | Elasto-Grip FC
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum, Masonry & Stucco, Other
- Generic Description Waterborne Modified Polyamine Epoxy
- Finish Matte
Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.
-
DOWNLOAD DATA SHEET
Series 154 | TnemeGuard
- Uses Flooring
- For DryWall and Gypsum, Concrete, Other
- Generic Description Mastic Waterborne Acrylic
- Finish Matte
Series 154 is a durable, single-component, water-based elastomeric coating that forms a waterproof film over horizontal or vertical concrete surfaces as well as various types of wallboard, wood and tile. It is an excellent choice for areas that receive light to moderate traffic including balconies, walkways, pedestrian bridges, mechanical equipment rooms and other surfaces such as concrete decks that may require protection from weather or water intrusion. Versatile application characteristics allow Series 154 to be applied neat, as a broadcast system, or mixed with aggregate and either applied as slurry or used as a surfacer or filler. Series 154 can also be reinforced using woven or octagonal mesh inlays where crack-bridging or extra durability is needed.
-
DOWNLOAD DATA SHEET
Series 156 | Enviro-Crete
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Modified Waterborne Acrylate
- Finish Matte — Smooth
Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light. Series 156 can also be used as a low cohesive stress overcoat for aged oil or alkyd systems.
-
DOWNLOAD DATA SHEET
Series 157 | Enviro-Crete
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Modified Waterborne Acrylate
- Finish Matte — Sand Texture
Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light.
-
DOWNLOAD DATA SHEET
Series 158 | Bio-Lastic
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Other
- Generic Description Specialized Waterborne Acrylate
- Finish Matte
A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent scrubbing and cleaning.
-
DOWNLOAD DATA SHEET
Series 161 | Tneme-Fascure
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and mild chemical contact. Fast recoat at 75°F (24°C).
-
DOWNLOAD DATA SHEET
Series 201 | Epoxoprime
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer. Excellent chemical resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 262 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
- Finish Gloss. *Note:* Prolonged exterior exposure will cause flattening of the finish.
Chemical- and abrasion-resistant elastomeric membrane with exceptional strength and flexibility. Ideally suited for environmental requirements of waste containment for primary or secondary containment. Spray applied, it forms the monolithic, impermeable liner required for earth collection and catch basins, decorative ponds and fountains, reservoirs, cooling towers, dams and spillways.
-
DOWNLOAD DATA SHEET
Series 264 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
- Finish Gloss. *Note:* Prolonged exterior exposure will cause flattening of the finish.
Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and secondary chemical containment.
-
DOWNLOAD DATA SHEET
Series 265 | Elasto-Shield TG
- Uses Surfacer, Filler, Patcher
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
A trowel-grade compound for use with Elasto-Shield products. Used to fill and repair cracks, bugholes, spalled or otherwise damaged concrete, masonry and asphalt. Also used for sealing the edges of faying surfaces, sealing seams, filling pits and encapsulating rivet and bolt heads on the interior of steel tanks.
-
DOWNLOAD DATA SHEET
Series 273 | Stranlok ML
- Uses Intermediate Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
A fiberglass mat reinforced coatings system for walls and ceilings providing cleanability and protection against chemical and physical abuse. Provides a high-performance, smooth, seamless surface with excellent chemical, stain, impact and abrasion resistance.
-
DOWNLOAD DATA SHEET
Series 280 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 280FC | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 282 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Polyamine Novolac Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.
-
DOWNLOAD DATA SHEET
Series 287 | Enviro-Pox
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Epoxy-Amine Adduct
- Finish Semi-gloss
A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate chemical and solvent exposures, as well as repeated cleaning. Can also be used as a primer or intermediate coat for thin film epoxy and urethane and acrylic systems.
-
DOWNLOAD DATA SHEET
Series 297 | Enviro-Glaze
- Uses Flooring, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Ceramic-Modified Waterborne Aliphatic Polyurethane
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Low odor, fast dry, low VOC, waterborne polyurethane coating for wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.
-
DOWNLOAD DATA SHEET
Series 700 | HydroFlon
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Gloss
An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. Hydroflon’s ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
-
DOWNLOAD DATA SHEET
Series V700 | HydroFlon
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Gloss
A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. Hydroflon’s ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
-
DOWNLOAD DATA SHEET
Series 701 | HydroFlon
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-gloss
An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. Hydroflon’s ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
-
DOWNLOAD DATA SHEET
Series V701 | HydroFlon
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-Gloss
A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.
-
Series 740 | UVX
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Modified Polycarbamide
- Finish Gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
An advanced technology finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention compared to traditional polyurethanes for long-term aesthetics on a wide range of exterior structures. Durable film stands up to abrasion and exterior weathering. Very good brush, roll and spray application characteristics. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.
-
Series 750 | UVX
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
-
DOWNLOAD DATA SHEET
Series 945 | Aerolon Tape
- Uses Insulating
- For DryWall and Gypsum, Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Insulative Tape, Self-adhesive
An innovative, self-adhesive thermally insulative tape that contains a proprietary blend of insulative particles for exceptionally low thermal conductivity. Excellent for controlling condensation and providing thermal efficiency on processing equipment such as tanks, pipes, and valves. It is also a highly effective thermal break for mitigating condensation on architectural components which transmit outside temperatures through the building envelope. Series 945 Aerolon Tape is available in multiple widths that are 30 feet long and 1.5 mm thick. It can be applied in multiple layers to achieve desired thickness.
-
DOWNLOAD DATA SHEET
Series 971 | Aerolon Acrylic
- Uses Insulating
- For Steel, Masonry & Stucco, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Fluid-applied acrylic insulation coating
- Finish Matte
An innovative, fluid-applied, thermal insulating coating utilizing aerogel particles that imparts exceptional insulative properties to a variety of substrates. Ideal for insulating pipes, valves, tanks, structural steel, or other substrates where thermal improvement or personnel protection is desired. Part of a durable, corrosion-resistant coating system that bonds to the substrate, greatly reducing the issues associated with corrosion under insulation (CUI) and mitigating thermal bridging by controlling condensation.
-
DOWNLOAD DATA SHEET
Series 1028 | Enduratone
- Uses Intermediate Coats, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description HDP Acrylic Polymer
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 1029 | Enduratone
- Uses Intermediate Coats, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description HDP Acrylic Polymer
- Finish Low semi-gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 1070 | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Gloss
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Fluoronar's ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
-
DOWNLOAD DATA SHEET
Series 1070V | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Gloss
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Fluoronar's ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
-
DOWNLOAD DATA SHEET
Series 1071 | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-gloss
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1071V | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-Gloss
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1072 | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Satin
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1072V | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Satin
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1074 | Endura-Shield II
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Gloss
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 1074U | Endura-Shield II
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Gloss
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultra-violet light (UV) absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 1075 | Endura-Shield II
- Uses Intermediate Coats, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 1075U | Endura-Shield II
- Uses Intermediate Coats, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultraviolet (UV) light absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.
-
Series 1077 | Enduralume
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
An acrylic polyurethane finish coat that contains a sparkle aluminum pigment creating a metallic aesthetic finish. It is a highly durable coating that is resistant to abrasion, wet conditions and exterior weathering. This high performance finish contains UV absorbers for extended color and gloss retention. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 1078 | Fluoronar Metallic
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-gloss.
A high-solids fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1078V | Fluoronar Metallic
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-gloss. Other gloss levels may be available, contact Tnemec.
A low VOC fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1080 | Endura-Shield
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Polyurethane
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
A waterborne polyurethane coating that provides color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, high gloss finish and easy cleanup.
-
DOWNLOAD DATA SHEET
Series 1081 | Endura-Shield
- Uses Intermediate Coats, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Polyurethane
- Finish Semi-Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
A waterborne polyurethane coating that provides excellent abrasion resistance and color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, semi-gloss finish and easy cleanup.
-
DOWNLOAD DATA SHEET
Series 1095 | Endura-Shield
- Uses Intermediate Coats, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
-
DOWNLOAD DATA SHEET
Series 1224 | Epoxoline WB
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Inorganic Hybrid Water-Based Epoxy
- Finish Flat
An advanced generation, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used as a primer or intermediate coat on structural steel, infrastructure, institutional, and architectural applications. Offers superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid-handling properties. Excellent resistance to yellowing and chalking when exposed to UV and an extended recoat window make it a versatile choice. Its high-performance formulation offers excellent adhesion and provides exceptional protection up to 400°F (204°C). Formula protected under U.S. patent. Note: This product is a direct replacement for Series 27WB Typoxy.