Modified Polyamidoamine Epoxy
High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
This product is available in 488 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volatile Organic Compounds
EPA Method 24 Unthinned: 0.72 lbs/gallon (86 grams/litre)
Thinned 15% (No. 19 Thinner): 1.91 lbs/gallon (229 grams/litre)
Thinned 15% (No. 18 Thinner): 2.05 lbs/gallon (246 grams/litre)
Thinned 15% (No. 62 Thinner): 0.72 lbs/gallon (86 grams/litre) †
Number of Components
Two: Part A and Part B
84.0 ± 2.0% (mixed) †
Conventional Build: 4.0 to 6.0 mils (100 to 150 microns) per coat.
Hi-Build: 7.0 to 9.0 mils (180 to 230 microns) per coat.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
1,347 mil sq ft/gal (33.1 m²/L at 25 microns). See APPLICATION for coverage rates. †
Series 6, 30, 35, 66, L69, L69F, N69, N69F, V69, V69F, 73, 84, 104, 115, 161, 1028, 1029, 1070, 1071, 1072, 1074, 1074U, 1075, 1075U. Note: When topcoating with Endura-Shield polyurethane finish, exterior exposed Series 135 has the following maximum time to recoat: Series 73, 1074/1074U or 1075/1075U, 60 days. Series 1070, 1071 or 1072, 14 days. If these times are exceeded, an epoxy intermediate coat or scarification is required before topcoating. Refer to appropriate topcoat data sheet for additional information.
|Temperature||To Touch||To Handle||To Recoat|
|75°F (24°C)||6 hours at 5.0 mils DFT 125 microns)||18 hours||24 hours|
Curing time varies with surface temperature, air movement, humidity and film thickness.
Galvanized Steel and Non-Ferrous Metal: Self-priming
Unthinned: 1.29 lbs/gal solids
Thinned 15% (No. 19 Thinner): 2.54 lbs/gal solids
Thinned 15% (No. 18 Thinner): 1.29 lbs/gal solids
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep