Series N69F
Hi-Build Epoxoline II
Generic Type
Polyamidoamine Epoxy
Common Usage
An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.
View more product detailsProduct Data Sheets
- English_Series_N69F_Hi_Build_Epoxoline_Ii_pds.pdf
- French_Series_N69F_Hi_Build_Epoxoline_Ii_pds.pdf
- Spanish_Series_N69F_Hi_Build_Epoxoline_Ii_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 511 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volume Solids
69.0 ± 2.0% (mixed) †
Finish
Satin
Theoretical Coverage
1,107 mil sq ft/gal (27.2 m²/L at 25 microns). See APPLICATION for coverage rates. †
Recommended DFT
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: The number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
HAPS
Unthinned: 2.35 lbs/gal solids
Thinned 10% (No. 4 Thinner): 3.20 lbs/gal solids
Thinned 10% (No. 60 Thinner): 2.35 lbs/gal solids
Topcoats
Series 21, 22, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 73, 104, 113, 114, 118, 141, 156, 157, 161, 180, 181, 287, 435, 436, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1077, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: The following recoat times apply for Series N69F: Immersion Service—Surface must be scarified after 30 days. Atmospheric Service—After 30 days, scarification or an epoxy tie-coat is required. Contact your Tnemec representative for specific recommendations.
Primers
Steel: Self-priming or Series 1, 27, 37H, 66, L69, L69F, N69, V69, 90E-92, 90G-1K97, 90-97, H90-97, 90-98, 91-H₂O, 94-H₂O, 135, 161, 394
Galvanized Steel and Non-Ferrous Metal: Self-priming or Series 66, L69, L69F, N69, V69, 161
Concrete: Self-priming or Series 130, 1254
CMU: Self-priming or Series 130, 1254
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
Volatile Organic Compounds
Unthinned: 2.30 lbs/gallon (280 grams/litre)
Thinned 10% (No. 4 Thinner): 2.75 lbs/gallon (330 grams/litre)
Thinned 10% (No. 60 Thinner): 2.76 lbs/gallon (331 grams/litre)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep