Series 1029
Enduratone
Generic Type
HDP Acrylic Polymer
Common Usage
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
View more product detailsProduct Data Sheets
- English_Series_1029_Enduratone_pds.pdf
- French_Series_1029_Enduratone_pds.pdf
- Spanish_Series_1029_Enduratone_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 503 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Number of Components
One
Primers
Wood: Series 10-99W, V10-99W or 151-1051
Steel: Series 1, 10, 22, 30, 37H, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 90G-1K97, 91-H²O, 94-H²O, 113, 115, 135, L140, L140F, N140, N140F, V140, V140F, 141, 161, 287, 394. Note: Allow Series 10, V10 and 37H to cure three days before topcoating. Additionally, Series 1, 90-97, 90G-1K97, 91-H²O, 94-H²O and 394 must be exterior exposed for three days prior to topcoating. Note: This product exhibits direct-to-metal capabilities for dry interior environments. Contact Tnemec Technical Service for more information.
Aluminum & Galvanized: Series 66, L69, L69F, N69, N69F, V69, V69F, 115, 135
Concrete: Self-priming or Series 6, 54, 66, L69, L69F, N69, N69F, V69, V69F, 130, 151, 156, 180, 287, 1254
CMU: Series 54, 130, 1254
Drywall: Series 51, 151-1051, 287
Curing Time
Temperature | To Touch | To Handle | To Recoat | To Resist Moisture |
---|---|---|---|---|
75°F (24°C) | 30 minutes | 2 hours | 2 hours | 6 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds
Unthinned: 0.79 lbs/gallon (94 grams/litre)
Thinned 5%: 0.79 lbs/gallon (94 grams/litre) †
Theoretical Coverage
643 mil sq ft/gal (15.8 m²/L at 25 microns). See APPLICATION for coverage rates. †
HAPS
Unthinned: 0.31 lbs/gal solids
Thinned 5%: 0.31 lbs/gal solids
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat.
Volume Solids
40.0 ± 2.0% †
Finish
Low semi-gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep