Series V115
Uni-Bond DF
Generic Type
Self-crosslinking Hydrophobic Acrylic
Common Usage
A high-performance, versatile coating appropriate for a variety of uses including:
Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer or intermediate coat on tanks, vessels and other industrial and architectural metal substrates.
Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas.
Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC.
Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
Contact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Curing Time
| Temperature | To Handle | To Recoat |
|---|---|---|
| 75°F (24°C) | 3 hours | 4 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Primers
Steel: Self-priming or Series 1, 27, 90-97, 90G-1K97, 91-H_2_O, 94-H_2_O, 135, 394.
Concrete: Self-priming only.
Finish
Eggshell
Volume Solids
44.0 ± 2.0% †
Recommended DFT
2.0 to 4.0 mils (50 to 100 microns) per coat.
HAPS
Unthinned: 0.01 lbs/gal solids
Thinned 5%: 0.01 lbs/gal solids
Theoretical Coverage
723 mil sq ft/gal (17.7 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components
One
Topcoats
Series 30, 113, 114, 156, 157, 180, 181, 1028 or 1029. Note: When Series V115 is applied over 90-97, 90G-1K97, 91-H_2_O or 94-H_2_O, only Series 1028 or 1029 can be used as topcoats.
Volatile Organic Compounds
Unthinned: 0.83 lbs/gallon (99 grams/litre)
Thinned 5%: 0.83 lbs/gallon (99 grams/litre) †
Intermediate
Series V115 may be used as an intermediate coat over 1, 90-97, 91-H_2_O, 94-H_2_O or 394. Series 44-900 Adhesion Promoter must be used when topcoating Series 1 or 394 with Series V115.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep