Advanced Thermoset Solution Fluoropolymer
A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.
Series V701 was tested in accordance with, and passed, the California Dept. of Public Health (CDPH) Standard Method v1.2 and meets the requirements of LEED v4.1 Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, Living Building Challenge Materials Petal 10, and WELL Building Standard v2 X06 VOC Restrictions.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
This product is available in 503 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volatile Organic Compounds
Unthinned: 1.11 lbs/gallon (133 grams/litre)
Unthinned: 0.55 lbs/gallon (66 grams/litre) (TBAc Exempt)
Thinned 10% (No. 63 Thinner): 1.77 lbs/gallon (213 grams/litre)
Thinned 10% (No. 63 Thinner): 1.35 lbs/gallon (161 grams/litre) (TBAc Exempt)
Thinned 10% (No. 65 Thinner): 1.87 lbs/gallon (224 grams/litre)
Thinned 10% (No. 65 Thinner): 0.55 lbs/gallon (66 grams/litre) (TBAc Exempt) †
Number of Components
Two: Part A and Part B
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Series 1, 20, FC20, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H²O, 94-H²O, 118, 135, L140, L140F, N140, N140F, V140, V140F, 161, 1224. Note: Series 1 requires an intermediate coat prior to topcoating with Series V701. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
|Temperature||To Touch||To Handle||Minimum Recoat ‡|
|90°F (32°C)||30 minutes||4-6 hours||6-8 hours|
|70°F (21°C)||30 minutes||6-8 hours||10-12 hours|
|50°F (10°C)||1 hour||12-15 hours||16-24 hours|
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
Unthinned: 0.29 lbs/gal solids
Thinned 10% (No. 63 Thinner): 0.35 lbs/gal solids
Thinned 10% (No. 65 Thinner): 0.29 lbs/gal solids †
878 mil sq ft/gal (24.0 m²/L at 25 microns) †
61.0 ± 2.0% (mixed) †
Note: When topcoating with Series V701, the following maximum recoat times apply: Over 20, FC20, 27, 66, L69, L69F, N69, N69F, V69, V69F, 135, L140, L140F, N140, N140F, V140, V140F, 161, 14 days; over itself, 30 days; over 750, 1075, 1075U, 1095, 45 days; over 1, 60 days; over 27WB, 73, 90-97, H90-97, 91-H2O, 94-H2O, 1224, 90 days.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep