Series 1095

Endura-Shield

Generic Type

Aliphatic Acrylic Polyurethane

Common Usage

A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Special Qualifications

Series 1095 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High-Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.

This product is part of a coating system tested in accordance with ISO 12944-6 (2018). Contact your Tnemec representative for coating system test results.

View more product details

Colors

    This product is available in 506 colors.

View Available Colors

View available colors in our Color Tool; you can also select and request color swatches.

Volatile Organic Compounds

Unthinned: 0.73 lbs/gallon (88 grams/litre) (TBAc exempt)
Unthinned: 1.93 lbs/gallon (232 grams/litre)
Thinned 15% (No. 10 Thinner): 1.96 lbs/gallon (234 grams/litre) (TBAc exempt)
Thinned 15% (No. 10 Thinner): 2.79 lbs/gallon (335 grams/litre)
Thinned 15% (No. 46 Thinner): 0.81 lbs/gallon (97 grams/litre) (TBAc exempt)
Thinned 15% (No. 46 Thinner): 1.99 lbs/gallon (238 grams/litre)
Thinned 15% (No. 49 Thinner): 0.73 lbs/gallon (88 grams/litre) (TBAc exempt)
Thinned 15% (No. 49 Thinner): 1.93 lbs/gallon (232 grams/litre)

Recommended DFT

Topcoat Service: 2.0 to 5.0 mils (51 to 127 microns) per coat.
Direct-to-Metal; over Zinc or MIO-Zinc: 3.0 to 6.0 mils (76 to 154 microns)
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. For DTM or applications over zinc or MIO-zinc, consult the latest version of Tnemec Technical Bulletin 13-100 or contact your Tnemec representative.

Primers

Steel: Self-priming or Series 1, 27, 66, L69, L69F, N69, N69F, V69, V69F, 90-75, 90-97, 90G-1K97, 91-H₂O, 93-H_2_O, 94-H₂O, 98-H₂O, 104, 132, 133, 135, 138, L140, L140F, N140, N140F, 141, 161, 394, 1220, 1224
Galvanized Steel & Non-Ferrous Metal: Series 66, L69, N69, V69, 1224. Note: For special galvanized surface preparation instructions, consult the latest version of Tnemec Technical Bulletin 10-78.
Concrete: Series 66, L69, L69F, N69, N69F, V69, V69F, L140, L140F, N140, N140F, 141, 161, 1224, 1254
CMU: Series 1254
Note: The following maximum recoat times apply; Series 141, 7 days; Series L69F, N69F, V69F, L140F, or N140F, 14 days; Series L69, N69, V69, L140, or N140, 21 days; Series 1, 27, 66, 104, 135, 161, 1254, 30 days; Series 132, 133 or 138, 90 days; Series 394, 1220, 1224, 12 months. Series 90-75, 90-97, 90G-1K97, 91-H₂O, 93-H_2_O, 94-H₂O, 98-H₂O, unlimited. Contact your Tnemec representative for specific recommendations.

Curing Time

Temperature To Touch To Handle To Recoat
75°F (24°C) 1-2 hours 9 hours 10-12 hours

To resist moisture: 8 hours. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster cure in temperatures down to 35°F (2°C), add No. 44-456 Urethane Accelerator, see separate product data sheet for cure information. Note: The use of Series 44-456 accelerator is not recommended when temperatures exceed 75°F (24°C).

Topcoats

Series 700, 701

Finish

Semi-gloss

Volume Solids

66.0 ± 2.0% (mixed) †

Number of Components

Two: Part A and Part B

HAPS

Unthinned: 0.00 lbs/gal solids
Thinned 15% (No. 10 Thinner): 0.04 lbs/gal solids
Thinned 15% (No. 46 Thinner): 0.09 lbs/gal solids

Theoretical Coverage

1,059 mil sq ft/gal (26.0 m²/L at 25 microns). See APPLICATION for coverage rates. †

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close