Series 1224
Epoxoline WB
Generic Type
Inorganic Hybrid Water-Based Epoxy
Common Usage
An advanced generation, water-based epoxy coating that is low odor, low VOC, and specially formulated with corrosion-inhibitive properties for the long-term protection of steel substrates. Excellent when used as a primer or intermediate coat within a high-performance coating system. Offers excellent adhesion to metal substrates and provides exceptional corrosion protection up to 400°F (204°C). Formula protected under U.S. patent.
Special Qualifications
Series 1224 was tested in accordance with, and passed, the California Dept. of Public Health (CDPH) Standard Method v1.2 and meets the requirements of LEED v4.1 Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, Living Building Challenge Materials Petal 10, and WELL Building Standard v2 X06 VOC Restrictions.
Series 1224 at 4.0 - 6.0 mils meets AISC requirements of Class A surface with a mean slip coefficient no less than 0.30 and a tension creep not in excess of 0.015 inches (0.38 mm).
This product is part of a coating system tested in accordance with ISO 12944-6 (2018). Contact your Tnemec representative for coating system test results.
View more product detailsProduct Data Sheets
- English_Series_1224_Epoxoline_Wb_pds.pdf
- French_Series_1224_Epoxoline_Wb_pds.pdf
- Spanish_Series_1224_Epoxoline_Wb_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Recommended DFT
4.0 to 8.0 mils (100 to 205 microns) per coat.
Note: Two coats may be required for aggressive exposures.
Volume Solids
65% (mixed)
Number of Components
Two: Part A and Part B
Primers
Steel: Self-priming or Series 1, 90G-1K97, 90-75, 90-97, H90-97, 91-H2O, 94-H2O, 394.
Note: Series 1, 90G-1K97, 90-97, H90-97, 91-H2O, 94-H2O and 394 must be exterior exposed for one day prior to topcoating.
Galvanized Steel: Self-priming
Volatile Organic Compounds
Unthinned: 0.01 lbs/gallon (1 gram/litre)
Theoretical Coverage
1,049 sq ft/gal (25.7 m²/L at 25 microns). See APPLICATION for coverage rates.
HAPS
0.00 lbs/gal solids
Topcoats
Series 30, 66, 72, 73, 113, 114, 115, 156, 157, 158, 161, 180, 181, 270, 273, 280, 281, 287, 290, 291, 297, 740, 750, 971, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1077, 1078, 1080, 1081, 1094, 1095, 1096. Note: When topcoating with Series 740 or 750 over 1224, a 90 day maximum recoat time applies. An extended cure time is needed when topcoating with Series 297, 1080 or 1081. Reference additional recoat times listed below the cure table. Note: More than one finish coat may be required to achieve uniform and desired gloss level.
Curing Time
| Temperature | To Touch | To Handle | To Recoat† |
|---|---|---|---|
| 120°F (49°C) | 15 minutes | 1 hour | 2 hours |
| 95°F (35°C) | 30 minutes | 2 hours | 3 hours |
| 75°F (24°C) | 1 hour | 6 hours | 8 hours |
| 55°F (13°C) | 2 hours | 8 hours | 16 hours |
| 45°F (7°C) | 3 hours | 10 hours | 24 hours |
| 35°F (2°C) | 4 hours | 3 days | 4 days |
† The following minimum recoat times apply when topcoating with Series 297, 1080 or 1081: 95°F (35°C) 12 hours, 75°F (24°C) and 55°F (13°C) 24 hours, 45°F (7°C) 4 days, 35°F (2°C) 7 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Substrates containing integral water repellants can prolong cure times.
Finish
Flat
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep