Hi-Build Epoxoline II
An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
This product is part of a coating system tested in accordance with ISO 12944-6 (2018). Contact your Tnemec representative for coating system test results.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
This product is available in 514 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: The number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Steel: Self-priming or Series 1, 27, 27WB, 37H, 66, L69, L69F, N69F, V69F, 90E-92, 90-97, H90-97, 90G-1K97, 90-98, 91-H²O, 94-H²O, 135, 161, 394, V530
Galvanized Steel and Non-Ferrous Metal: Self-priming or Series 66, L69, L69F, N69F, V69F, 161
Concrete: Self-priming or Series 27WB, 130, 1254
CMU: Self-priming or 130, 1254
Volatile Organic Compounds
Unthinned: 2.40 lbs/gallon (285 grams/litre)
Thinned 10% (No. 4 Thinner): 2.80 lbs/gallon (334 grams/litre)
Thinned 10% (No. 60 Thinner): 2.80 lbs/gallon (335 grams/litre)
67.0 ± 2.0% (mixed) †
1,074 mil sq ft/gal (26.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Unthinned: 2.40 lbs/gal solids
Thinned 10% (No. 4 Thinner): 3.25 lbs/gal solids
Thinned 10% (No. 60 Thinner): 2.40 lbs/gal solids
Series 22, 27WB, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 72, 73, 104, 113, 114, 118, 141, 156, 157, 161, 180, 181, 262, 265, 287, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1077, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: The following recoat times apply for Series N69: Immersion Service—Surface must be scarified after 60 days. Atmospheric Service—After 60 days, scarification or an epoxy tie-coat is required. When topcoating with Series 740 or 750, recoat time for N69 is 21 days for atmospheric service. Contact your Tnemec representative for specific recommendations.
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep