Modified Polyamine Epoxy
A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
- 05BL Gainesboro
- 25BL Fountain Bleu
- 42BL Blue Channel
- 04BR Desert Sands
- 15BR Pale
- 16BR Orion's Belt
- 68BR Twine
- 91GN Balsam
- 28GR Black Water
- 31GR Slate Gray
- 33GR Gray
- 46GR Sinker
- 28RD Monterrey Tile
- 02SF Lemon Yellow/Safety
- 06SF Candy Apple Red/Safety
- 11WH White
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Concrete: Self-priming or Series 27WB, 201, 205, 208, 233, 237, 238, 241.
CMU: Self-priming over filled CMU
Wall board, Wood & Drywall: Self-priming or Series 151, 201, 233. Note: For taping joints on drywall, use a high quality compound such as Sheetrock brand Durabond 90.
Volatile Organic Compounds
Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
100% (mixed) †
Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Gloss. (Roller application provides an orange peel finish.)
Series 130, 215, 218, 1254. Note: A repair kit of 201, 208 or 233 mixed with fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Number of Components
Two: Part A and Part B (2 Parts A to 1 Part B by volume)
|Temperature||To Topcoat||To Place in Service|
|75°F (24°C)||5-7 hours||16-24 hours|
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep