Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and secondary chemical containment.
Underwriters Laboratories Inc. ® classified to ANSI/NSF Standard 61 for use in potable water storage. Maximum contact area is: 20 cm² per litre of water, with minimum allowable size of tanks 5,000 gallons; cold water applications.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
88.0 ± 2.0% (mixed)
|Temperature||Recoat Window ††||Full Cure||Immersion|
|75°F (24°C)||3 hours at 50 mils DFT||24 hours||Potable: 14 days on-Potable: 48 hours|
† Film thicknesses greater than 50 mils DFT will require additional time for solvent release. Curing time varies with air & substrate temperatures, air movement, humidity and film thickness. †† Note: Scarify the surface and apply a coat of Series V260 Tneme-Bond before recoating if the maximum recoat time has been exceeded.
1,396 mil sq ft/gal (34.2 m²/L at 25 microns).
50 to 80 dry mils (1270 to 2032 microns). Note: Multiple passes at timed intervals are required to achieve recommended dry film thickness. Timing is dependent upon material and substrate temperatures. See the Elasto-Shield Application Guide for additional instructions.
Number of Components
Two—Liquids: Part A (resin)) and Part B (iso)
Volatile Organic Compounds
0.75 lbs/gallon (90 grams/litre)
Gloss. Note: Prolonged exterior exposure will cause flattening of the finish.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep