Low VOC Tneme-Gloss
A low VOC, high solids, high gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
Number of Components
0.32 lbs/gallon solids
Steel: Series 1, 10, V10, 27WB, 37H, 66, N69, 88HS, 530
Galvanized Steel and Non-Ferrous Metal: Series 27WB, 66 or N69. Note: Series 66 or N69 exterior exposed for 3 weeks or longer requires an epoxy-polyamide intermediate coat or scarification prior to topcoating with 2HS. Brush blasting with fine abrasive is the preferred method of scarification.
Wood: Series 10-99W, V10-99W
81.0 ± 2.0% †
1,299 mil sq ft/gal (31.9 m2/L at 25 microns). See APPLICATION for coverage rates. †
1.5 to 3.5 mils (40 to 90 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.
Volatile Organic Compounds
Unthinned: 2.09 lbs/gallon (250 grams/litre)
Thinned 5% (No. 49 Thinner): 2.09 lbs/gallon (250 grams/litre)
Thinned 5% (No. 1 Thinner): 2.29 lbs/gallon (275 grams/litre)
|Temperature||To Touch||To Handle||To Recoat|
|75° (24°C)||5 hours||18 hours||24 hours|
Curing time varies with surface temperature, air movement, humidity and film thickness.
Water Tank Exteriors: Five days or more curing time required before filling with water.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep