High gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.
A low VOC, high solids, high gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.
Chemically active, rust-inhibitive primer for ferrous metals. This low VOC primer provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.
Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.
A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid handling properties. Series 27WB exhibits low yellowing and good color stability in whites and light tone colors. Formula protected under U.S. patent.
Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications. Note: Not recommended for immersion.
A waterborne primer-sealer for uncoated drywall in interior dry environments.
Single component coating for filling surface voids in porous concrete and masonry block on interior, dry, above-grade masonry surfaces.
Industry standard for epoxy coatings for over 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.
Product is made to order for specific projects. Contact your Tnemec Representative for additional information.
A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.
A versatile, low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized, or distilled water. Can serve as a block filler on cementitious or masonry substrates.
A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used as a block filler on cementitious or masonry substrates.
A durable topcoat for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
A coating for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
Fast-dry, lead- and chromate-free, rust-inhibitive shop primer for structural and miscellaneous steel that is to be enclosed, protected or topcoated.
Self-curing, primer/finish with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.
An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.
Series 90-75 is a waterborne, zinc-rich epoxy that offers extended protection to steel surfaces in industrial and marine environments. This innovative coating forms a micro-porous polymer structure in the dry film improving the conductivity between the zinc particles which provides superior galvanic corrosion protection. Its ultra-low VOC formulation cures quickly and provides outstanding long-term corrosion resistance when used with other Tnemec high-performance coatings. U.S. patent pending.
An advanced technology, three-component, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.
An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It’s user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the “same-day.” Also used for field touch-up of inorganic zinc coating. Application methods include “dry-fall” under certain conditions (see Application).
An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It's user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the "same-day." Also used for field touch-up of inorganic zinc coating. H90-97 is HAPS compliant for use in-shop.
Self-curing, corrosion-resistant steel or ductile iron primer with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.
A single-component, moisture-cured, zinc-rich primer for steel structures, including the interior and exterior of steel potable water tanks. Commonly used in commercial, industrial, and marine markets in various applications to provide outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec coatings. Series 94-H2O has no maximum recoat time, cures quickly and offers rapid recoat at surface temperatures down to 35°F (2°C). Note: When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.
High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
High performance gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.
Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals and primes surface for application of a variety of high performance water- and solvent-based topcoats in moderately severe exposures.
Series 132 is a versatile, high-build, surface tolerant epoxy designed for application over tightly adhered light corrosion and marginally prepared or previously coated steel, or as a primer/intermediate coat under weather-able finishes. Series 132 may be applied at low-temperatures, over dew point conditions and on damp surfaces. Suitable for use on structures subjected to corrosive, damp, or immersion environments including coastal and marine structures such as tanks, boat hulls, voids, machinery spaces, bilges, and other wet areas. Good for maintenance and new construction applications.
A high-build, aluminum-filled surface tolerant epoxy mastic designed for application over tightly adhered corrosion, marginally prepared steel, and old coatings. Series 133 may be applied at low temperatures and on damp surfaces. The preferred selection for holding back active corrosion and as a basecoat under weatherable and epoxy finishes.
High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.
Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.
Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light. Series 156 can also be used as a low cohesive stress overcoat for aged oil or alkyd systems.
Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light.
A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent scrubbing and cleaning.
Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and mild chemical contact. Fast recoat at 75°F (24°C).
Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application "dry-falls" under certain conditions.
Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application “dry-falls” under certain conditions.
High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer. Excellent chemical resistance for a variety of substrates.
A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as 35°F (2°C).
Flexible epoxy underlayment for bridging small substrate cracks in concrete and to provide a protective waterproof membrane under aggregate reinforced flooring systems. This flexible basecoat is capable of withstanding 50 mils of differential movement without damaging the system.
Epoxoprime MVT is a unique, moisture-tolerant, two component, low viscosity, high solids epoxy primer designed to reduce moisture vapor emissions and provide alkalinity control for concrete with elevated moisture vapor transmission levels that exceed the acceptable limits of non-breathing resilient and polymer floor topping finishes. Epoxoprime MVT can be applied to properly prepared, 10 day old concrete and withstands moisture vapor transmission up to 15 lbs (per ASTM F 1869) and relative humidity up to 95% (per ASTM F 2170). Epoxoprime MVT has a low perm rating (0.05 perm) and is alkaline insensitive to pH levels of 14.
A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.
An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.
A single-component, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces or extended with aggregate to make high-strength concrete.
A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N222 can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat, and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N223 is a decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N224 is a customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
Commonly used in facilities that manufacture, process, assemble, package, service, inspect or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges which have established, implemented and maintain an Electrostatic Discharge (ESD) Control Program. Also used in data centers, clean room/labs, computer rooms, military/aerospace, avionics, automotive manufacturing or any environments where electrostatic discharge (ESD) is a nuisance or may have damaging effects. Formulated using single wall carbon tube technology specifically designed to provide superior electrical conductivity and enhanced mechanical properties. Ensures permanent and uniform electrical conductivity eliminating “hot spots". Designed for static dissipative resistance in the range of 1x10^6^ to 1x10^9^ (one million to one billion) ohms surface resistance when testing point to point/point to ground for establishing floor resistance values per ANSI/ESD S20.20-2014. Project specifications and application specifics should clearly indicate what resistance range is required. Note: Not intended for industries requiring protection against explosion hazards such as dust, fuels, and solvents or electrically initiated explosive compounds and devices.
A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
A multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against chemicals, thermal cycling, impact and abrasion.
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.
A chemical resistant, multi-purpose novolac epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
Ultra-Tread MVT is a low odor, slurry applied, high performance moisture control base layer designed to reduce moisture vapor emissions prior to the application of non-breathing, polymer floor topping finishes. Ultra-Tread MVT is a self-priming, base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170). Note: Series 241 must be broadcast to refusal with aggregate, color quartz or decorative flake typically completed within 10 to 15 minutes of application. Color quartz and/or decorative flake systems will require an additional broadcast layer using Series 222, 224, 237, 238, 256, 257 or 286, clear to obtain a uniform appearance and texture before applying the desired clear finish coats. This will typically result in a total system thickness of approximately 1/8".
Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
Ultra-Tread V is a low-odor mortar designed for troweling vertical surfaces such as trenches and equipment pads, and for building cove base. It should be used for vertical application needs in conjunction with horizontal applications of Series 242 Ultra-Tread S, Series 244 Ultra-Tread M or Series 245 Ultra-Tread S. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity.
Ultra-Tread M is a low odor, mortar applied floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread M is a self-priming mortar that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
Ultra-Tread Glaze is a pigmented, high-build, low odor, polyurethane coating. Typically used as a topcoat for sealing or locking aggregate in Series 242 Ultra-Tread S or Series 245 Ultra-Tread S broadcast texture finishes. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity.
Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space. Note: For horizontal surfaces only.
Extremely hard, chemical-resistant urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space.
An extremely fast-curing, multi-purpose and finish coat resin with low temperature cure capability. Used to build aggregate, colored quartz or decorative flake filled floor topping systems. It can also be used as a clear or pigmented finish coat over systems built using Series 256 or systems built using epoxy, or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 256 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
A slower setting Polyaspartic floor coating, offering longer working time and lower viscosity. Series 257 minimizes the potential for lap marks and roller lines when used in large flooring applications. It can be used as a two coat thin-film system or as a clear or pigmented finish coat over systems built using epoxy or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 257 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
A high-performance, fiberglass-reinforced wall coating for protection against acids, alkalis and physical abuse. Stranlok’s 100% solids epoxy technology is solventless and VOC compliant, making Stranlok virtually odorless and permitting application in occupied facilities. Its accelerated curing schedule and installation process mean faster return-to-service times. A unique blend of two types of premixed reinforcing fibers allows Stranlok to be spray or trowel applied up to 40 mils. The integrity of the interlocking fibers allows the surface to withstand daily high-pressure steam cleaning. In addition to this high tolerance to “thermal shock,” Stranlok also features broad chemical, impact and abrasion resistance.
A fiberglass mat reinforced coatings system for walls and ceilings providing cleanability and protection against chemical and physical abuse. Provides a high-performance, smooth, seamless surface with excellent chemical, stain, impact and abrasion resistance.
A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
A high-gloss, glaze-like coating for concrete floors. It imparts a smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.
A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.
A clear, thixotropic binder resin. Series N283 is designed to be used in all phases of cove building or vertical trowel applications (priming, base coat, and topcoat) and it can also be used for concrete repair. Note: When using Series N283 for building cove or troweled wall applications an aggregate similar to 30/50 mesh silica sand, Series 222 or 223 Quartz must be used. Has excellent adhesion, good chemical resistance, repairs concrete, and can be applied up to 1/4” without sagging.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N284 is a clear finish for decorative flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake-filled flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance. Coves and Vertical Surfaces: Series N285 can be used to build grout and seal vertical surfaces such as 4” base and wainscot.
A clear novolac finish for decorative flooring systems. It protects against harsh chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.
A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate chemical and solvent exposures, as well as repeated cleaning. Can also be used as a primer or intermediate coat for thin film epoxy and urethane and acrylic systems.
Extremely hard, chemical-resistant urethane coating for applications in commercial, industrial, and marine environments with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried finishes.
Extremely hard, chemical-resistant urethane coating with excellent abrasion resistance, wash-down conditions, corrosive fumes, and chemical contact.
Extremely hard, chemical-resistant polyurethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss and color retention among the best of air dried finishes. Note: For horizontal surfaces only.
Durable, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Typically used over epoxy and urethane flooring systems for increased abrasion and chemical resistance and a low-sheen appearance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
Extremely hard, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has superb flow characteristics, excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss among the best of air dried finishes. Typically used over epoxy and urethane flooring systems for increased abrasion and chemical resistance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
A clear, low odor, fast dry, low VOC, waterborne polyurethane floor coating for interior wall and floor applications. Provides enhanced abrasion resistance and stain resistance. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.
Low odor, fast dry, low VOC, waterborne polyurethane coating for wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.
Specially formulated, one-component, moisture-cured, micaceous iron oxide and zinc-filled primer that offers superior bonding to marginally prepared rusty steel and tightly adhered old coatings. This high-performance primer is ideal for corrosion resistance with a triple barrier mechanism of zinc, mio, and urethane resin built into the dry film. It is suitable as a corrosion-resistant primer under certain fireproofing systems. Contact your Tnemec representative for specific information.
Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum finish is desired. Topcoating provides enhancement of systems and more latitude with color. Compatible with aged coatings, but verify with test patch.
This product has been discontinued. Please refer to Series 617 | Conformal Stain WB for a suitable alternative, or contact your Tnemec Sales Representative
Conformal Stain is a penetrating, solvent-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain exhibits excellent color stability and is designed not to peel or flake when applied to a properly prepared substrate. Repels water when used on dense substrates.
Conformal Stain WB is a penetrating, water-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain WB exhibits excellent color stability, and is designed not to peel or flake when applied to a properly prepared substrate. Conformal Stain WB provides color uniformity by correcting color imperfections often found in integrally colored concrete masonry, natural stone, tilt-up and precast panels. Repels water when used on dense substrates. Conformal WB is mildew resistant and contains agents that inhibit the growth of mildew on the surface of the stain.
Phylon 1422 is a non-yellowing, acrylic coating that highlights the natural color of masonry by providing a clear, semi-gloss sheen. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Phylon 1422 provides a durable, wet-look finish to exposed aggregate, ground-face block, sandblasted concrete and many other vertical concrete, masonry and natural stone surfaces. Repels water when used on dense substrates.
Phylon WB is a non-yellowing, water-based, acrylic coating that highlights the natural color of masonry by providing a clear, gloss sheen. Its special formulation provides a hard, durable gloss finish. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Phylon WB provides a durable, wet-look finish to exposed aggregate, ground-face block, sandblasted concrete and many other vertical concrete, masonry and natural stone surfaces.
Conformal Clear is a penetrating, solvent-based masonry coating for virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Clear is designed to darken and highlight the substrate and will not peel or flake. Conformal Clear is compatible with most caulking and sealing compounds. Repels water when used on dense substrates.
Series 626 Dur A Pell GS has been formulated to provide superior protection against, and easy removal of, unwanted graffiti. This product is intended for use in conjunction with Series 680 Mark A Way to provide a complete Graffiti Protection System. Dur A Pell GS is a clear, silicone rubber based formulation, which protects vertical concrete block, brick, cast concrete, stone and other masonry substrates with little or no change to the appearance of the untreated substrate. Dur A Pell GS protects both new and existing uncoated substrates by penetrating into the pores, to prevent graffiti penetration. It has excellent stability against ultraviolet rays and salt spray and provides long-lasting protection.
Series V626 Dur A Pell GS has been formulated to provide superior protection against, and easy removal of unwanted graffiti. This product is intended for use in conjunction with Series 680 Mark A Way to provide a complete Graffiti Protection System. Dur A Pell GS is a clear, silicone rubber based formulation, which protects vertical concrete block, brick, cast concrete, stone and other masonry substrates with little or no change to the appearance of the untreated substrate. Dur A Pell GS protects both new and existing substrates by penetrating into the pores, to prevent graffiti penetration. It has excellent stability against ultraviolet rays and salt spray and provides long-lasting protection.
CT Densifyer is a clear, penetrating, water-based sealer for virtually all above-grade, horizontal, poured-in-place concrete. Concrete treated with CT Densifyer resists dusting, abrasion, wear, and damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to increase density at the surface and dustproof concrete.
This product has been discontinued. Please refer to Series 633 | Prime-A-Pell H2O for a suitable alternative, or contact your Tnemec Sales Representative
Prime-A-Pell H2O Concentrate is a concentrated water-based water repellent requiring dilution at the job site. Upon dilution, Prime-A-Pell H2O Concentrate produces a clear, filmless, penetrating water-repellent treatment for virtually all above-grade, vertical concrete, stucco, precast, sandstone and brick and block masonry. Concrete, stone and masonry treated with diluted Prime-A-Pell H2O Concentrate resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
Prime-A-Pell H2O is a clear, filmless, low solids, penetrating water-based water repellent for virtually all above-grade, concrete, stucco, precast, brick, sandstone and block masonry. Concrete, stone and masonry treated with Prime-A-Pell H2O resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and water deterioration.
Dur-A-Pell 20 is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, block and brick masonry and natural stone. Concrete, stone and masonry treated with Dur A Pell 20 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
Prime-A-Pell 200 is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical concrete, stucco, block and brick masonry. Concrete, stone and masonry treated with Prime-A-Pell 200 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration. Prime-A-Pell 200 is manufactured utilizing a process whereby defused quartz carbide and an oligomeric siloxane are coupled, then dispersed in a hydrocarbon solvent mixture.
Prime-A-Pell Plus is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, block and brick masonry. Concrete, stone and masonry treated with Prime-A-Pell Plus resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
Prime-A-Pell N.S. (natural stone) is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical concrete and block and brick masonry and vertical and horizontal installations of natural stone. Concrete, natural stone and masonry treated with Prime-A-Pell N.S. resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
This product has been discontinued. Please refer to Series 662 | Prime-A-Pell Plus for a suitable alternative, or contact your Tnemec Sales Representative
Dur A Pell 40 is a clear, filmless, penetrating water repellent for virtually all above-grade, concrete, stucco, natural stone, block and brick masonry. Concrete, stone and masonry treated with Dur A Pell 40 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
Dur A Pell 100 is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, natural stone, block and brick masonry. Concrete, stone and masonry treated with Dur A Pell 100 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
Liquid cleaner used in association with Chemprobe Series 626 and V626 Dur A Pell GS to remove graffiti from block, brick, concrete, stone and other porous masonry substrates. May also be used alone for the removal of most types of graffiti in a single application.
An advanced technology finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention compared to traditional polyurethanes for long-term aesthetics on a wide range of exterior structures. Durable film stands up to abrasion and exterior weathering. Very good brush, roll and spray application characteristics. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.
A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
An innovative, self-adhesive thermally insulative tape that contains a proprietary blend of insulative particles for exceptionally low thermal conductivity. Excellent for controlling condensation and providing thermal efficiency on processing equipment such as tanks, pipes, and valves. It is also a highly effective thermal break for mitigating condensation on architectural components which transmit outside temperatures through the building envelope. Series 945 Aerolon Tape is available in multiple widths that are 30 feet long and 1.5 mm thick. It can be applied in multiple layers to achieve desired thickness.
An innovative, fluid-applied, thermal insulating coating utilizing aerogel particles that imparts exceptional insulative properties to a variety of substrates. Ideal for insulating pipes, valves, tanks, structural steel, or other substrates where thermal improvement or personnel protection is desired. Part of a durable, corrosion-resistant coating system that bonds to the substrate, greatly reducing the issues associated with corrosion under insulation (CUI) and mitigating thermal bridging by controlling condensation.
A durable, easy-to-use, water-based acrylic coating that offers long-wearing protection to a variety of substrates. Excellent as a topcoat or intermediate-coat on anti-corrosive steel coating systems or when applied to concrete and drywall. Easy to apply by brush, roller, and spray, this product’s low odor and low VOC qualities make it versatile choice on architectural and industrial projects. Note: Application methods include “dry-fall” under certain conditions (see application).
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. Contains ceramic spheres for enhanced thermal stability. May be applied by spray, brush or roller over Aerolon insulative coating systems. It is mildew resistant and exhibits very good gloss and color stability.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Fluoronar's ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Fluoronar's ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultra-violet light (UV) absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultraviolet (UV) light absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.
An acrylic polyurethane finish coat that contains a sparkle aluminum pigment creating a metallic aesthetic finish. It is a highly durable coating that is resistant to abrasion, wet conditions and exterior weathering. This high performance finish contains UV absorbers for extended color and gloss retention. NOT FOR IMMERSION SERVICE.
A high-solids fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
A low VOC fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Series 44-500 (patent 5,548,010 and other patents pending), an optional indicator dye, is available to aid in uniform application. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.
A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.
A waterborne polyurethane coating that provides color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, high gloss finish and easy cleanup.
A waterborne polyurethane coating that provides excellent abrasion resistance and color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, semi-gloss finish and easy cleanup.
A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Can be applied by brush, roller or spray. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
An advanced generation, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used as a primer or intermediate coat on structural steel, infrastructure, institutional, and architectural applications. Offers superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid-handling properties. Excellent resistance to yellowing and chalking when exposed to UV and an extended recoat window make it a versatile choice. Its high-performance formulation offers excellent adhesion and provides exceptional protection up to 400°F (204°C). Formula protected under U.S. patent. Note: This product is a direct replacement for Series 27WB Typoxy.
An advanced generation, low odor, low VOC, high solids, water-based epoxy coating for filling surface voids in porous concrete and masonry block in interior and exterior environments. Provides high bond strength, fast curing, and rapid overcoating capabilities and can be topcoated with a variety of water- and solvent-based coatings.
Continue Exploring in the color tool
When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.
You can use our Color Tool page to explore our available colors and request swatches of colors you like.
Sorry, there is a maximum of 6 color swatches.