Series 296
Enviro-Glaze Clear
Generic Type
Ceramic-Modified Waterborne Aliphatic Polyurethane
Common Usage
A clear, low odor, fast dry, low VOC, waterborne polyurethane floor coating for interior wall and floor applications. Provides enhanced abrasion resistance and stain resistance. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.
Special Qualifications
The resin used to manufacture this product was a recipient of the EPA's "Green Chemistry Challenge Award."
View more product detailsProduct Data Sheets
- English_Series_296_Enviro_Glaze_Clear_pds.pdf
- French_Series_296_Enviro_Glaze_Clear_pds.pdf
- Spanish_Series_296_Enviro_Glaze_Clear_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 0000 Clear
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Intermediate
Series 205, 210, 222, 223, 224, 237, 238, 280, 281, 284, 285, 287 and 297. Note: When applying Series 296 over a broadcast or mortar system, an epoxy grout coat is required.
Theoretical Coverage
842 sq ft/gal (20.7 m²/L at 25 microns) †
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Application of coating below minimum or above maximum recommended dry film thicknesses may adversely affect coating aesthetics and performance. Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Finish
Gloss
Volume Solids
53 ± 2.0% (mixed) †
Number of Components
Two: Part A and Part B
Volatile Organic Compounds
Unthinned: 1.08 lbs/gallon (129 grams/litre)
Thinned 20%: 1.08 lbs/gallon (129 grams/litre) †
Curing Time
| Temperature | To Touch | To Recoat | To Service | Full Cure |
|---|---|---|---|---|
| 75°F (24°C) | 2 hours | 8 hours | 24 hours | 72 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep