Modified Polyamine Fast-Cure Epoxy
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
Unthinned: 0.0 lbs/gal solids
Thinned 5% (No. 2 Thinner): 0.37 lbs/gal solids
Series 206, 215. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Volatile Organic Compounds
Unthinned: 0.26 lbs/gallon (31 grams/litre)
Thinned 5% (No. 2 Thinner): 0.59 lbs/gallon (71 grams/litre)
Series 237, 238, 247, 248, 252SC, 256, 280, 281, 282, 284, 285, 286, 287, 290, 291, 294, 295, 296, 297. Note: If Series 247 (tinted), 248 (tinted), 290, 291 or 297 is selected for the finish coat over a broadcast system, a grout coat of Series 237 or 238 (tinted), 256 (tinted), 280 or 281 is required. If Series 247 (clear), 248 (clear), 285, 294, 295 or 296 is selected for the finish coat over a broadcast system, a grout coat of Series 237 or 238 (clear), 256 (clear) or 284 is required.
Primer: 6.0 to 12.0 (150-305 microns) per coat.
Broadcast: 1/16" to 1/8” (Double broadcast or slurry broadcast required to achieve 1/8")
Mortar: Suggested 1/4” (Minimum of 1/8”, Maximum of 1”)
Grout coat: 8.0 to 16.0 mils (203 to 406 microns)
Intermediate or Topcoat: 8.0 to 16.0 mils (203 to 406 microns)
Number of Components
Liquids–Two: Part A and Part B (2 parts A to 1 part B by volume)
Field Colorant–One (optional) (Series 820)
Note: Aggregate for mortar applications (S238-0301C) is available from Tnemec or can be purchased from an approved supplier.
1,604 mil sq ft/gal (39.4 m2/L at 25 microns). See APPLICATION for coverage rates.
|Temperature||To Topcoat/Broadcast||To Place in Service|
|75°F (24°C)||4 to 8 hours||16 hours|
Note: If more than 8 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Note: There is no maximum recoat time if aggregate has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep