Series 2H | Hi-Build Tneme-Gloss

• Uses Top and Finish Coats
• For DryWall and Gypsum, Steel
• Generic Description Alkyd
• Finish Gloss

High gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.

Series 2HS | Low VOC Tneme-Gloss

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Alkyd
• Finish Gloss

A low VOC, high solids, high gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.

Series 22 | Epoxoline

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Ductile Iron, Pipes & Fittings
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service in potable water and wastewater environments. Specialized curing mechanism allows for faster cure response with airless spray application.

Series FC22 | Epoxoline

• Uses Top and Finish Coats
• For Steel, Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, 100% solids epoxy liner for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion and chemical contact. For use on the interior and exterior of steel or concrete tanks, reservoirs, and pipes in potable water service.

Series 43-236 | Fast Dry Aluminum

• Uses Top and Finish Coats
• For Steel
• Generic Description Copolymer Aluminum
• Finish Semi-Gloss

Fast drying spray-applied coating offering good protection for most exterior weathering conditions. Note: Series 43-236's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 43-36 | Chrome Aluminum

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Alkyd Aluminum
• Finish Low sheen

Metallic aluminum finish for protection against weather, heat and mild industrial fumes. Used on primed or previously-painted carbon and galvanized steel: tank exteriors, piping, equipment and structures. Not for immersion service.

Series 66 | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

Industry standard for epoxy coatings for over 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.

Series 66HS | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

• Product is made to order for specific projects. Contact your Tnemec Representative for additional information.

A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.

Series L69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

A versatile, low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized, or distilled water. Can serve as a block filler on cementitious or masonry substrates.

Series L69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.

Series N69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series N69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used as a block filler on cementitious or masonry substrates.

Series V69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series V69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used as a block filler on cementitious or masonry substrates.

Series 73 | Endura-Shield

• Uses Intermediate Coats, Original Equipment Manufacturer (OEM), Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 104 | H.S. Epoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Cycloaliphatic Amine Epoxy
• Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.

Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance.

Series 115 | Uni-Bond DF

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Self-crosslinking Hydrophobic Acrylic
• Finish Eggshell

A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series V115 | Uni-Bond DF

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Self-crosslinking Hydrophobic Acrylic
• Finish Eggshell

A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 120-5001 | Vinester

• Uses Top and Finish Coats
• For Steel, Concrete
• Generic Description Novolac Vinyl Ester
• Finish Semi-gloss

A finish coat designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels. Provides splash, spillage and fume protection for structural surfaces and secondary containment. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.

Series L140 | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative, low VOC potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, and fittings in potable water service.

Series L140F | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Versatile epoxy coating (factory accelerated version of L140) for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks that contain demineralized, deionized, distilled, or potable water.

Series N140 | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.

Series N140F | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.

Series 141 | Epoxoline

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete
• Generic Description Modified Polyamine Epoxy

A high-solids lining offering high-build edge protection and long-term durability. Series 141 is abrasion and corrosion-resistant for extended immersion service in crude oil and finished fuels. Used to protect steel and concrete storage tanks, transport tanks, pipelines, and industrial wastewater while increasing service life.

Series 142 | Epoxoline

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete
• Generic Description Glass Flake Reinforced Modified Polyamine Epoxy

Abrasion resistant, high solids, epoxy coating which offers high-build edge protection and excellent corrosion resistance. Contains glass flake and aluminum oxide for improved film integrity. For use on the interior and exterior of steel or concrete tanks, pipes, and other heavy-duty equipment in industrial service.

Series 156 | Enviro-Crete

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Modified Waterborne Acrylate
• Finish Matte — Smooth

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light. Series 156 can also be used as a low cohesive stress overcoat for aged oil or alkyd systems.

Series 157 | Enviro-Crete

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Modified Waterborne Acrylate
• Finish Matte — Sand Texture

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light.

Series 158 | Bio-Lastic

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Other
• Generic Description Specialized Waterborne Acrylate
• Finish Matte

A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent scrubbing and cleaning.

Series 161 | Tneme-Fascure

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and mild chemical contact. Fast recoat at 75°F (24°C).

Series 180 | W.B. Tneme-Crete

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Acrylic Emulsion
• Finish Flat, smooth

Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application "dry-falls" under certain conditions.

Series 181 | W.B. Tneme-Crete

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Acrylic Emulsion
• Finish Flat, sand texture

Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application “dry-falls” under certain conditions.

Series 201 | Epoxoprime

• Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Modified Polyamine Epoxy

High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer. Excellent chemical resistance for a variety of substrates.

Series 205 | Terra-Tread FC

• Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Polyamide Epoxy
• Finish Pigmented: Satin Clear: Gloss

A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as 35°F (2°C).

Series 210 | Even-Flow SL

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Aggregate-Filled Modified Polyamine Epoxy
• Finish Gloss

A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.

Series N222 | Deco-Tread

• Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
• Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.

A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N222 can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat, and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Series N223 | Deco-Trowel

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
• Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.

A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N223 is a decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Series N224 | Deco-Fleck

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Decorative Flake-Filled Modified Polyamine Epoxy
• Finish Gloss. Decorative flake—multi-colored appearance, available in 1/16", 1/8" and 1/4" sizes. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.

A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N224 is a customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Series 239 | ChemTread

• Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Novolac Polyamine Epoxy

A chemical resistant, multi-purpose novolac epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.

Series 247 | EverThane

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Aliphatic Moisture Cured Urethane
• Finish Gloss

Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space. Note: For horizontal surfaces only.

Series 248 | EverThane

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Aliphatic Moisture Cured Urethane
• Finish Semi-gloss. *Note:* The gloss level can be reduced by adding two Part C filler components to each kit.

Extremely hard, chemical-resistant urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space.

Series 252SC | ChemBloc

• Uses Linings & Secondary Containment, Top and Finish Coats
• For Steel, Concrete
• Generic Description Novolac Vinyl Ester

A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.

Series 256 | ExcellaThane

• Uses Intermediate Coats, Top and Finish Coats
• For Concrete
• Generic Description Modified Aliphatic Polyaspartic
• Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.

An extremely fast-curing, multi-purpose and finish coat resin with low temperature cure capability. Used to build aggregate, colored quartz or decorative flake filled floor topping systems. It can also be used as a clear or pigmented finish coat over systems built using Series 256 or systems built using epoxy, or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 256 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.

Series 257 | ExcellaThane SS

• Uses Intermediate Coats, Top and Finish Coats
• For Concrete
• Generic Description Modified Aliphatic Polyaspartic
• Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.

A slower setting Polyaspartic floor coating, offering longer working time and lower viscosity. Series 257 minimizes the potential for lap marks and roller lines when used in large flooring applications. It can be used as a two coat thin-film system or as a clear or pigmented finish coat over systems built using epoxy or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 257 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.

Series 280 | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Modified Polyamine Epoxy
• Finish Gloss. (Roller application provides an orange peel finish.)

A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.

Series 280FC | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Modified Polyamine Epoxy
• Finish Gloss. (Roller application provides an orange peel finish.)

A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.

Series 281 | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss

A high-gloss, glaze-like coating for concrete floors. It imparts a smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.

Series 282 | Tneme-Glaze

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Polyamine Novolac Epoxy
• Finish Gloss. (Roller application provides an orange peel finish.)

A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.

Series N283 | Coving Resin

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss

A clear, thixotropic binder resin. Series N283 is designed to be used in all phases of cove building or vertical trowel applications (priming, base coat, and topcoat) and it can also be used for concrete repair. Note: When using Series N283 for building cove or troweled wall applications an aggregate similar to 30/50 mesh silica sand, Series 222 or 223 Quartz must be used. Has excellent adhesion, good chemical resistance, repairs concrete, and can be applied up to 1/4” without sagging.

Series N284 | Deco-Clear

• Uses Intermediate Coats, Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss. The texture of the finished surface depends on the number of coats applied.

A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N284 is a clear finish for decorative flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.

Series N285 | Satinglaze

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Gloss - Orange Peel

A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake-filled flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance. Coves and Vertical Surfaces: Series N285 can be used to build grout and seal vertical surfaces such as 4” base and wainscot.

Series 286 | Deco-Clear CR

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Modified Novolac Polyamine Epoxy
• Finish Gloss. The texture of the finished surface depends on the number of coats applied.

A clear novolac finish for decorative flooring systems. It protects against harsh chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.

Series 290 | CRU

• Uses Flooring, Top and Finish Coats
• For Steel, Concrete
• Generic Description Aliphatic Polyester Polyurethane
• Finish Semi-Gloss

Extremely hard, chemical-resistant urethane coating for applications in commercial, industrial, and marine environments with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried finishes.

Series V290 | CRU

• Uses Flooring, Top and Finish Coats
• For Steel, Concrete
• Generic Description Aliphatic Polyester Polyurethane
• Finish Semi-Gloss

Extremely hard, chemical-resistant urethane coating with excellent abrasion resistance, wash-down conditions, corrosive fumes, and chemical contact.

Series 296 | Enviro-Glaze Clear

• Uses Flooring, Top and Finish Coats
• For Concrete
• Generic Description Ceramic-Modified Waterborne Aliphatic Polyurethane
• Finish Gloss

A clear, low odor, fast dry, low VOC, waterborne polyurethane floor coating for interior wall and floor applications. Provides enhanced abrasion resistance and stain resistance. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.

Series 297 | Enviro-Glaze

• Uses Flooring, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Ceramic-Modified Waterborne Aliphatic Polyurethane
• Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Low odor, fast dry, low VOC, waterborne polyurethane coating for wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.

Series 425 | Epoxoline ARO

• Uses Top and Finish Coats
• For Steel
• Generic Description Polyamine Epoxy
• Finish Semi-gloss

A 100% volume solids Abrasion Resistant Overcoat (ARO) system designed for underground piping as a protective topcoat for fusion bonded epoxy (FBE) during directional- and thrust-bore drilling and other severe abrasive pipeline applications. ARO can also be used as a direct to metal (DTM) system to protect steel or ductile iron substrates when HDD (horizontal directional drilling) or abrasion is a concern. Contact Tnemec for more information.

Series 700 | HydroFlon

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Gloss

An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. HydroFlon’s ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.

Series V700 | HydroFlon

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Gloss

A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. Hydroflon’s ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.

Series 701 | HydroFlon

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-gloss

An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. Hydroflon’s ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.

Series V701 | HydroFlon

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-Gloss

A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.

Series 1026 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Acrylic Emulsion
• Finish Matte

A durable, easy-to-use, water-based acrylic coating that offers long-wearing protection to a variety of substrates. Excellent as a topcoat or intermediate-coat on anti-corrosive steel coating systems or when applied to concrete and drywall. Easy to apply by brush, roller, and spray, this product’s low odor and low VOC qualities make it versatile choice on architectural and industrial projects. Note: Application methods include “dry-fall” under certain conditions (see application).

Series 1028 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description HDP Acrylic Polymer
• Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.

Series 1029 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description HDP Acrylic Polymer
• Finish Low semi-gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 1061 | Oculox

• Uses Top and Finish Coats
• For Steel
• Generic Description Silicon-Grafted Composite
• Finish Semi-gloss

A highly innovative, water-based coating that combines user-friendly application characteristics with the aesthetic performance of the industry's best topcoats. This unique formulation cures into a durable film with exceptional resistance to ultra-violet light degradation, resulting in long-term color and gloss retention that extends maintenance cycles. Excellent for use on structural steel, tank exteriors, decorative metals, and industrial and marine equipment. This isocyanate-free, low VOC, and low-odor formulation dry-falls when spray applied, offering fast, labor-saving application rates and protection to nearby structures from damaging overspray.

Series 1070 | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Gloss

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Fluoronar's ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.

Series 1070V | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Gloss

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Fluoronar's ultra-durable film tolerates areas on steel plate that are frequently wet or experience standing water and situational immersion. Contact your Tnemec representative for more information.

Series 1071 | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-gloss

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1071V | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-Gloss

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1072 | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Satin

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1072V | Fluoronar

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Satin

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1078 | Fluoronar Metallic

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-gloss.

A high-solids fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1078V | Fluoronar Metallic

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-gloss. Other gloss levels may be available, contact Tnemec.

A low VOC fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.

Series 1079 | Metallic Clearcoat

• Uses Top and Finish Coats
• For Steel
• Generic Description Aliphatic Acrylic Polyurethane
• Finish High gloss

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Series 44-500 (patent 5,548,010 and other patents pending), an optional indicator dye, is available to aid in uniform application. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.

Series 1079-0762 | Metallic Clearcoat

• Uses Top and Finish Coats
• For Steel
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-Gloss

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.

Series 1079-0763 | Metallic Clearcoat

• Uses Top and Finish Coats
• For Steel
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Satin

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.

Series 1080 | Endura-Shield

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Waterborne Acrylic Polyurethane
• Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

A waterborne polyurethane coating that provides color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, high gloss finish and easy cleanup.

Series 1081 | Endura-Shield

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Waterborne Acrylic Polyurethane
• Finish Semi-Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

A waterborne polyurethane coating that provides excellent abrasion resistance and color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, semi-gloss finish and easy cleanup.

Series 1095 | Endura-Shield

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 1220 | HydroLine

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete
• Generic Description Glass Flake Inorganic Hybrid Epoxy
• Finish Flat

A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and protection of steel and concrete surfaces in immersion service, including potable water and mild wastewater. Easy to apply and solvent-free, Series 1220 is an excellent choice for coating tanks, reservoirs, and basins.