- Home
- Products
-
DOWNLOAD DATA SHEET
AK01 | Tnemec Shop Primer
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Modified Alkyd
- Finish Flat
AK01 is a high-solids, fast drying primer that provides extended weathering for shop and field priming of structural and miscellaneous steel.
-
DOWNLOAD DATA SHEET
Series 1 | Omnithane
- Uses Primer and/or Block Fillers
- For Steel, Other, Ductile Iron, Pipes & Fittings
- Generic Description Modified Aromatic Polyurethane Primer
A single component, moisture-cured resin, containing a proprietary blend of micaceous iron oxide and zinc to function as a primer which is field and shop friendly. May be used in OEM manufacturing, potable water and wastewater immersion with the proper topcoats. May also be used for marginally prepared rusty steel and tightly adhering old coatings for non-immersion maintenance situations.
-
DOWNLOAD DATA SHEET
Series V10 | Tnemec Primers
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Modified Alkyd
Chemically active, rust-inhibitive primer for ferrous metals. This low VOC primer provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.
-
Series 20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Industry standard for potable water epoxy coatings for nearly 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for its benchmark performance.
-
Series FC20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Fast-curing protective coating for use in steel and concrete structures. Contact your Tnemec representative for other systems and additional information on potential uses.
-
DOWNLOAD DATA SHEET
Series 22 | Epoxoline
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Ductile Iron, Pipes & Fittings
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service in potable water and wastewater environments. Specialized curing mechanism allows for faster cure response with airless spray application.
-
DOWNLOAD DATA SHEET
Series 27 | F.C. Typoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For Steel, Other
- Generic Description Polyamide Epoxy
- Finish Flat
Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.
-
Series 27WB | Typoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Inorganic Hybrid Water-Based Epoxy
- Finish Satin
- This product has been discontinued. Please contact your local sales representative for further assistance.
A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid handling properties. Series 27WB exhibits low yellowing and good color stability in whites and light tone colors. Formula protected under U.S. patent.
-
DOWNLOAD DATA SHEET
Series 37H | Chem-Prime H.S.
- Uses Primer and/or Block Fillers
- For Steel, Other, Ductile Iron, Pipes & Fittings
- Generic Description Phenolic Alkyd
Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications. Note: Not recommended for immersion.
-
DOWNLOAD DATA SHEET
Series 51 | PVA Sealer
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum
- Generic Description Vinyl Acrylic
A waterborne primer-sealer for uncoated drywall in interior dry environments.
-
DOWNLOAD DATA SHEET
Series 54 | Masonry Filler
- Uses Primer and/or Block Fillers
- For Masonry & Stucco, Concrete
- Generic Description Vinyl Acrylic Latex Block Filler
- Finish Flat
Single component coating for filling surface voids in porous concrete and masonry block on interior, dry, above-grade masonry surfaces.
-
DOWNLOAD DATA SHEET
Series 66 | Hi-Build Epoxoline
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Industry standard for epoxy coatings for over 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.
-
Series 66HS | Hi-Build Epoxoline
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Product is made to order for specific projects. Contact your Tnemec Representative for additional information.
A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.
-
DOWNLOAD DATA SHEET
Series L69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
A versatile, low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized, or distilled water. Can serve as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series L69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.
-
DOWNLOAD DATA SHEET
Series N69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
-
DOWNLOAD DATA SHEET
Series N69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series V69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
-
DOWNLOAD DATA SHEET
Series V69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series 88HS | Azeron H.S. Primer
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Alkyd Primer
- Finish Flat
Fast-dry, lead- and chromate-free, rust-inhibitive shop primer for structural and miscellaneous steel that is to be enclosed, protected or topcoated.
-
DOWNLOAD DATA SHEET
Series 90E-92 | Tneme-Zinc
- Uses High Temp, Primer and/or Block Fillers
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Ethyl Silicate Inorganic Zinc-Rich
Self-curing, primer/finish with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 90G-1K97 | Tneme-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Polyurethane, Zinc-Rich
An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.
-
DOWNLOAD DATA SHEET
Series 90-75 | Tneme-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Open Matrix, Zinc Rich Epoxy
Series 90-75 is a waterborne, zinc-rich epoxy that offers extended protection to steel surfaces in industrial and marine environments. This innovative coating forms a micro-porous polymer structure in the dry film improving the conductivity between the zinc particles which provides superior galvanic corrosion protection. Its ultra-low VOC formulation cures quickly and provides outstanding long-term corrosion resistance when used with other Tnemec high-performance coatings. U.S. patent pending.
-
DOWNLOAD DATA SHEET
Series 90-97 | Tneme-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Urethane, Zinc-Rich
An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It’s user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the “same-day.” Also used for field touch-up of inorganic zinc coating. Application methods include “dry-fall” under certain conditions (see Application).
-
DOWNLOAD DATA SHEET
Series H90-97 | Tneme-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Urethane, Zinc-Rich
An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It's user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the "same-day." Also used for field touch-up of inorganic zinc coating. H90-97 is HAPS compliant for use in-shop.
-
DOWNLOAD DATA SHEET
Series 90-98 | Tneme-Zinc
- Uses High Temp, Primer and/or Block Fillers
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Ethyl Silicate Inorganic Zinc-Rich
Self-curing, corrosion-resistant steel or ductile iron primer with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 91-H2O | Hydro-Zinc
- Uses Primer and/or Block Fillers
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Aromatic Urethane, Zinc-Rich
A two-component, moisture-cured, zinc-rich primer for the interior and exterior of steel potable water tanks. Provides outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec potable water tank coatings. It cures quickly and can be topcoated the same day at surface temperatures down to 35°F (2°C). Series 91-H2O has no maximum recoat time, making it ideally suited as a primer for both sides of plate steel surfaces in water tank fabrication shops. Application methods include “dry-fall” under certain conditions (see Application). Note: When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.
-
DOWNLOAD DATA SHEET
Series 94-H2O | Hydro-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Urethane, Zinc-Rich
A single-component, moisture-cured, zinc-rich primer for steel structures, including the interior and exterior of steel potable water tanks. Commonly used in commercial, industrial, and marine markets in various applications to provide outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec coatings. Series 94-H2O has no maximum recoat time, cures quickly and offers rapid recoat at surface temperatures down to 35°F (2°C). Note: When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.
-
DOWNLOAD DATA SHEET
Series 98-H2O | Hydro-Zinc
- Uses Primer and/or Block Fillers
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Open Matrix, Zinc Rich Epoxy
An innovative, waterborne, zinc-rich epoxy primer that offers extended protection for the interior and exterior of steel potable water tanks. Its ultra-low VOC formulation cures quickly and provides outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec coatings. U.S. patent pending. Note: When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.
-
DOWNLOAD DATA SHEET
Series 104 | H.S. Epoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Cycloaliphatic Amine Epoxy
- Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.
Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance.
-
DOWNLOAD DATA SHEET
Series 108 | ProBond
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Concrete, Other
- Generic Description Low Stress Penetrating Epoxy Sealer
- Finish High-gloss
Series 108 ProBond is a thin-film, low-stress, epoxy designed to adhere to a multitude of substrates, including old finishes, and is frequently used as an overcoating primer. Series 108 is solvent-free and is applied at a low film thickness to reduce stress and weight on old tightly adhered coatings creating a foundation to accept high-performance epoxy and polyurethane finishes. Also used, when specified, as the primer under Lavacrete polymer concrete epoxy toppings. NOT FOR IMMERSION SERVICE. Formerly Series 3600 ProBond. Note: Adhesion analysis of old finishes and test patches are recommended before overcoating a structure. Reference the latest version of Tnemec Technical Bulletin 98-10 for more information.
-
DOWNLOAD DATA SHEET
Series 109 | ProBond
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Concrete, Other
- Generic Description Low Stress Penetrating Epoxy Sealer
- Finish High-gloss
Series 109 ProBond is a lower-temperature curing, thin-film, low-stress, epoxy designed to adhere to a multitude of substrates, including old finishes, and is frequently used as an overcoating primer. Series 109 is solvent-free and is applied at a low film thickness to reduce stress and weight on old tightly adhered coatings creating a foundation to accept high-performance epoxy and polyurethane finishes. Also used, when specified, as the primer under Lavacrete polymer concrete epoxy toppings. Note: Adhesion analysis of old finishes and test patches are recommended before overcoating a structure. Reference the latest version of Tnemec Technical Bulletin 98-10 for more information.
-
DOWNLOAD DATA SHEET
Series 113 | H.B. Tneme-Tufcoat
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Epoxy
- Finish Satin
High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
-
DOWNLOAD DATA SHEET
Series 114 | H.B. Tneme-Tufcoat
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Epoxy
- Finish Gloss
High performance gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
-
DOWNLOAD DATA SHEET
Series 115 | Uni-Bond DF
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Self-crosslinking Hydrophobic Acrylic
- Finish Eggshell
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series V115 | Uni-Bond DF
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Self-crosslinking Hydrophobic Acrylic
- Finish Eggshell
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 118 | Uni-Bond Mastic
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Mastic Waterborne Acrylic
- Finish Matte
A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.
-
DOWNLOAD DATA SHEET
Series 120-5002 | Vinester
- Uses Primer and/or Block Fillers
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A primer designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels. Provides splash, spillage and fume protection for structural surfaces and secondary containment. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 130 | Envirofill
- Uses Primer and/or Block Fillers
- For Masonry & Stucco, Concrete
- Generic Description Waterborne Cementitious Acrylic
Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals and primes surface for application of a variety of high performance water- and solvent-based topcoats in moderately severe exposures.
-
DOWNLOAD DATA SHEET
Series 132 | ProTuff Mastic
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Phenalkamine Epoxy Mastic
- Finish Semi-gloss
Series 132 is a versatile, high-build, surface tolerant epoxy designed for application over tightly adhered light corrosion and marginally prepared or previously coated steel, or as a primer/intermediate coat under weather-able finishes. Series 132 may be applied at low-temperatures, over dew point conditions and on damp surfaces. Suitable for use on structures subjected to corrosive, damp, or immersion environments including coastal and marine structures such as tanks, boat hulls, voids, machinery spaces, bilges, and other wet areas. Good for maintenance and new construction applications.
-
DOWNLOAD DATA SHEET
Series 133 | ProTuff Aluminum
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Phenalkamide Aluminum Epoxy Mastic
- Finish Semi-gloss
A high-build, aluminum-filled surface tolerant epoxy mastic designed for application over tightly adhered corrosion, marginally prepared steel, and old coatings. Series 133 may be applied at low temperatures and on damp surfaces. The preferred selection for holding back active corrosion and as a basecoat under weatherable and epoxy finishes.
-
DOWNLOAD DATA SHEET
Series 135 | Chembuild
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Modified Polyamidoamine Epoxy
- Finish Semi-gloss
High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series L140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative, low VOC potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, and fittings in potable water service.
-
DOWNLOAD DATA SHEET
Series L140F | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Versatile epoxy coating (factory accelerated version of L140) for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks that contain demineralized, deionized, distilled, or potable water.
-
DOWNLOAD DATA SHEET
Series N140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series N140F | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
-
Series V140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.
-
Series V140F | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series 141 | Epoxoline
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete
- Generic Description Modified Polyamine Epoxy
A high-solids lining offering high-build edge protection and long-term durability. Series 141 is abrasion and corrosion-resistant for extended immersion service in crude oil and finished fuels. Used to protect steel and concrete storage tanks, transport tanks, pipelines, and industrial wastewater while increasing service life.
-
DOWNLOAD DATA SHEET
Series 142 | Epoxoline
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete
- Generic Description Glass Flake Reinforced Modified Polyamine Epoxy
Abrasion resistant, high solids, epoxy coating which offers high-build edge protection and excellent corrosion resistance. Contains glass flake and aluminum oxide for improved film integrity. For use on the interior and exterior of steel or concrete tanks, pipes, and other heavy-duty equipment in industrial service.
-
DOWNLOAD DATA SHEET
Series 151-1051 | Elasto-Grip FC
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum, Masonry & Stucco, Other
- Generic Description Waterborne Modified Polyamine Epoxy
- Finish Matte
Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.
-
DOWNLOAD DATA SHEET
Series 161 | Tneme-Fascure
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and mild chemical contact. Fast recoat at 75°F (24°C).
-
DOWNLOAD DATA SHEET
Series 180 | W.B. Tneme-Crete
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Acrylic Emulsion
- Finish Flat, smooth
Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application "dry-falls" under certain conditions.
-
DOWNLOAD DATA SHEET
Series 181 | W.B. Tneme-Crete
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Acrylic Emulsion
- Finish Flat, sand texture
Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application “dry-falls” under certain conditions.
-
DOWNLOAD DATA SHEET
Series 201 | Epoxoprime
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer. Excellent chemical resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 205 | Terra-Tread FC
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyamide Epoxy
- Finish Pigmented: Satin Clear: Gloss
A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as 35°F (2°C).
-
DOWNLOAD DATA SHEET
Series 206 | Sub-Flex EP
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Flexible Epoxy
Flexible epoxy underlayment for bridging small substrate cracks in concrete and to provide a protective waterproof membrane under aggregate reinforced flooring systems. This flexible basecoat is capable of withstanding 50 mils of differential movement without damaging the system.
-
DOWNLOAD DATA SHEET
Series 206SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
- For Concrete
- Generic Description Modified Flexible Polyamine Epoxy
Glass-reinforced, flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC, and 252SC when a flexible basecoat is desired.
-
DOWNLOAD DATA SHEET
Series 208 | Epoxoprime MVT
- Uses Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
Epoxoprime MVT is a unique, moisture-tolerant, two component, low viscosity, high solids epoxy primer designed to reduce moisture vapor emissions and provide alkalinity control for concrete with elevated moisture vapor transmission levels that exceed the acceptable limits of non-breathing resilient and polymer floor topping finishes. Epoxoprime MVT can be applied to properly prepared, 10 day old concrete and withstands moisture vapor transmission up to 15 lbs (per ASTM F 1869) and relative humidity up to 95% (per ASTM F 2170). Epoxoprime MVT has a low perm rating (0.05 perm) and is alkaline insensitive to pH levels of 14.
-
DOWNLOAD DATA SHEET
Series 215 | Surfacing Epoxy
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 215ML | Mat-Reinforced Epoxy Lining
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Modified Polyamine Epoxy
Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.
-
DOWNLOAD DATA SHEET
Series N222 | Deco-Tread
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N222 can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat, and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 233 | Power-Tread LE
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
-
DOWNLOAD DATA SHEET
Series 237 | Power-Tread
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
-
DOWNLOAD DATA SHEET
Series 237SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
A multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 238 | Power-Tread FC
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Fast-Cure Epoxy
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.
-
DOWNLOAD DATA SHEET
Series 239 | ChemTread
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Novolac Polyamine Epoxy
A chemical resistant, multi-purpose novolac epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.
-
DOWNLOAD DATA SHEET
Series 239SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
- Generic Description Modified Novolac Polyamine Epoxy
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 241 | Ultra-Tread MVT
- Uses Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Polyurethane Modified Concrete
Ultra-Tread MVT is a low odor, slurry applied, high performance moisture control base layer designed to reduce moisture vapor emissions prior to the application of non-breathing, polymer floor topping finishes. Ultra-Tread MVT is a self-priming, base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170). Note: Series 241 must be broadcast to refusal with aggregate, color quartz or decorative flake typically completed within 10 to 15 minutes of application. Color quartz and/or decorative flake systems will require an additional broadcast layer using Series 222, 224, 237, 238, 256, 257 or 286, clear to obtain a uniform appearance and texture before applying the desired clear finish coats. This will typically result in a total system thickness of approximately 1/8".
-
DOWNLOAD DATA SHEET
Series 242 | Ultra-Tread S
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
-
DOWNLOAD DATA SHEET
Series 251SC | ChemBloc
- Uses Primer and/or Block Fillers, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 287 | Enviro-Pox
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Epoxy-Amine Adduct
- Finish Semi-gloss
A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate chemical and solvent exposures, as well as repeated cleaning. Can also be used as a primer or intermediate coat for thin film epoxy and urethane and acrylic systems.
-
DOWNLOAD DATA SHEET
Series 394 | PerimePrime
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Polyurethane, Mio-Zinc Filled Primer
Specially formulated, one-component, moisture-cured, micaceous iron oxide and zinc-filled primer that offers superior bonding to marginally prepared rusty steel and tightly adhered old coatings. This high-performance primer is ideal for corrosion resistance with a triple barrier mechanism of zinc, mio, and urethane resin built into the dry film. It is suitable as a corrosion-resistant primer under certain fireproofing systems. Contact your Tnemec representative for specific information.
-
Series V530 | Omnithane
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel
- Generic Description Moisture-Cured Aromatic Urethane
- Finish Matte
- This product has been discontinued. Please contact your local sales representative for further assistance.
Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum finish is desired. Topcoating provides enhancement of systems and more latitude with color. Compatible with aged coatings, but verify with test patch.
-
DOWNLOAD DATA SHEET
Series 1220 | HydroLine
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete
- Generic Description Glass Flake Inorganic Hybrid Epoxy
- Finish Flat
A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and protection of steel and concrete surfaces in immersion service, including potable water and mild wastewater. Easy to apply and solvent-free, Series 1220 is an excellent choice for coating tanks, reservoirs, and basins.
-
DOWNLOAD DATA SHEET
Series 1224 | Epoxoline WB
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Inorganic Hybrid Water-Based Epoxy
- Finish Flat
An advanced generation, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used as a primer or intermediate coat on structural steel, infrastructure, institutional, and architectural applications. Offers superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid-handling properties. Excellent resistance to yellowing and chalking when exposed to UV and an extended recoat window make it a versatile choice. Its high-performance formulation offers excellent adhesion and provides exceptional protection up to 400°F (204°C). Formula protected under U.S. patent. Note: This product is a direct replacement for Series 27WB Typoxy.
-
DOWNLOAD DATA SHEET
Series 1254 | EpoxoBlock WB
- Uses Primer and/or Block Fillers
- For Masonry & Stucco, Concrete
- Generic Description Inorganic Hybrid Water-Based Epoxy
- Finish Flat
An advanced generation, low odor, low VOC, high solids, water-based epoxy coating for filling surface voids in porous concrete and masonry block in interior and exterior environments. Provides high bond strength, fast curing, and rapid overcoating capabilities and can be topcoated with a variety of water- and solvent-based coatings.
-
DOWNLOAD DATA SHEET
Series 1407 | Vinester
- Uses Primer and/or Block Fillers
- For Steel, Concrete
- Generic Description Flexible Vinyl Ester
- Finish Gloss
Series 1407 is a specially formulated primer with flexible properties designed for use on concrete and steel substrates. Series 1407 may be used under a wide-range of Tnemec vinyl ester intermediate and finish coats with the exception of direct food contact systems. Replaces ProPolymer 4805.