Series 1028
Enduratone
Generic Type
HDP Acrylic Polymer
Common Usage
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.
Special Qualifications
Series 1028 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High-Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
View more product detailsProduct Data Sheets
- English_Series_1028_Enduratone_pds.pdf
- French_Series_1028_Enduratone_pds.pdf
- Spanish_Series_1028_Enduratone_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volume Solids
40.0 ± 2.0% †
Number of Components
One
Primers
Wood: Series V10-99W or 151-1051
Steel: Series 1, V10, 22, 37H, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 90G-1K97, 91-H₂O, 94-H₂O, 113, 115, V115, 118, 135, L140, L140F, N140, N140F, V140, V140F, 141, 161, 287, 394. Note: Allow Series V10 and 37H to cure three days before topcoating. Additionally, Series 1, 90-97, 90G-1K97, 91-H2O, 94-H2O and 394 must be exterior exposed for three days prior to topcoating. Note: This product exhibits direct-to-metal capabilities for dry interior environments. Contact Tnemec Technical Service for more information.
Aluminum & Galvanized: Series 66, L69, N69, V69, 115, V115, 135, 1224. Note: For special galvanized surface preparation instructions, consult the latest version of Tnemec Technical Bulletin 10-78.
Concrete: Self-priming or Series 54, 66, L69, L69F, N69, N69F, V69, V69F, 130, 151, 156, 180, 287, 1026, 1254
CMU: Series 54, 130, 1254
Drywall: Series 51, 151-1051, 287, 1026
HAPS
Unthinned: 0.00 lbs/gal solids
Thinned 5%: 0.00 lbs/gal solids
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat.
Topcoats
Series 1029. Note: Series 700, V700, 701, and V701 may be used as topcoats when applying logos or striping. Series 1028 must cure for three (3) days prior to topcoating.
Theoretical Coverage
633 mil sq ft/gal (15.5 m²/L at 25 microns). See APPLICATION for coverage rates. †
Finish
Gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Volatile Organic Compounds
Unthinned: 0.71 lbs/gallon (85 grams/litre)
Thinned 5%: 0.71 lbs/gallon (85 grams/litre) †
Curing Time
| Temperature | To Touch | To Handle | To Recoat | To Resist Moisture |
|---|---|---|---|---|
| 75°F (24°C) | 30 minutes | 2 hours | 2 hours | 6 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep