Series N140F
Pota-Pox Plus
Generic Type
Polyamidoamine Epoxy
Common Usage
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
Special Qualifications
Certified by NSF International in accordance with NSF/ANSI/CAN Std. 61. Series N140F is an NSF-approved primer, stripe coat, and intermediate coat for applications on the interior of steel tanks; Series N140F is an NSF-approved primer and finish coat for applications on pumps, valves, fittings, and mechanical devices. Reference Tnemec’s certified product listing at www.nsf.org for additional details.
Conforms to AWWA C 210 (without 44-700). Contact your Tnemec representative for systems and additional information.
View more product detailsProduct Data Sheets
- English_Series_N140F_Pota_Pox_Plus_pds.pdf
- French_Series_N140F_Pota_Pox_Plus_pds.pdf
- Spanish_Series_N140F_Pota_Pox_Plus_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volume Solids
68.0 ± 2.0% (mixed) †
Recommended DFT
2.0 to 10.0 mils (50 to 225 microns) per coat. Note: Reference the NSF website at www.nsf.org for details on the maximum allowable DFT. Note: The number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Topcoats
Interior: Series 21, 22, FC22, L140, L140F, N140, N140F, 406
Exterior: Series 22, 27, 66, L69, L69F, N69, N69F, V69, V69F, 73, 118, L140, L140F, N140, N140F, 156, 157, 161, 180, 181, 700, V700, 701, V701, 1026, 1028, 1029, 1077, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: When topcoating with Series 700, V700, 701, or V701, an intermediate coat of Series 73, 1095 or 1096 is required. Note: The following recoat times apply for Series N140F: Immersion Service—Surface must be scarified by blasting with fine abrasive after 30 days. Atmospheric Service—After 30 days, scarification or an epoxy tie-coat is required. Note: When topcoating with Series 406, recoat times will vary with temperature. Reference the Series 406 product data sheet for specific recoat times. Contact your Tnemec representative for specific recommendations.
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
HAPS
Unthinned: 2.3 lbs/gal solids
Thinned 5% (No. 60 Thinner): 2.3 lbs/gal solids
Thinned 10% (No. 4 Thinner): 3.1 lbs/gal solids
Volatile Organic Compounds
Unthinned: 2.3 lbs/gallon (273 grams/litre)
Thinned 5% (No. 60 Thinner): 2.5 lbs/gallon (299 grams/litre)
Thinned 10% (No. 4 Thinner): 2.7 lbs/gallon (323 grams/litre) †
Theoretical Coverage
1,094 mil sq ft/gal (26.8 m²/L at 25 microns). See APPLICATION for coverage rates. †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep