Series 1072
Fluoronar
Generic Type
Advanced Thermoset Solution Fluoropolymer
Common Usage
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
View more product detailsProduct Data Sheets
- English_Series_1072_Fluoronar_pds.pdf
- French_Series_1072_Fluoronar_pds.pdf
- Spanish_Series_1072_Fluoronar_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Intermediate
Series 73, 750, 1075, 1075U, 1095 (Intermediate coat may be required for some applications, please contact Tnemec.)
Note: When topcoating with Series 1072, the following maximum recoat times apply: Over 27, 66, L69, L69F, N69, N69F, V69, V69F, 135 or 161, 14 days; over itself, 30 days; over 750, 1075, 1075U, 1095, 45 days; over 1 and 394, 60 days; over 73, 90-97, 91-H2O, 94-H2O and 1224, 90 days.
Curing Time
| Temperature | To Touch | To Handle | Minimum Recoat ‡ |
|---|---|---|---|
| 90°F (32°C) | 30 minutes | 4-6 hours | 6-8 hours |
| 70°F (21°C) | 30 minutes | 6-8 hours | 10-12 hours |
| 50°F (10°C) | 1 hour | 12-15 hours | 16-24 hours |
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
Volume Solids
60.0 ± 2.0% (mixed) †
Number of Components
Two: Part A and Part B
Primers
Series 1, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H₂O, 94-H₂O, 118, 135, 161, 394, 1224. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1072. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
Theoretical Coverage
962 mil sq ft/gal (23.6 m²/L at 25 microns). †
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
HAPS
Unthinned: 3.89 lbs/gal solids
Unthinned 5% (No. 63 Thinner): 3.88 lbs/gal solids
Finish
Satin
Volatile Organic Compounds
EPA Method 24 †
Unthinned: 2.64 lbs/gallon (316 grams/litre)
Thinned 5% (No. 63 Thinner): 2.81 lbs/gallon (337 grams/litre)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep