Series L69F
Hi-Build Epoxoline II
Generic Type
Polyamidoamine Epoxy
Common Usage
A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.
View more product detailsProduct Data Sheets
- English_Series_L69F_Hi_Build_Epoxoline_Ii_pds.pdf
- French_Series_L69F_Hi_Build_Epoxoline_Ii_pds.pdf
- Spanish_Series_L69F_Hi_Build_Epoxoline_Ii_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- P002 Tank White- Pool
- P003 Star- Pool
- P007 Light Gray- Pool
- P008 Cumulus- Pool
- P005 Fountainbleu- Pool
- P004 Clear Sky- Pool
- P006 Delft Blue- Pool
- P009 Mineral Water- Pool
- P020 Black- Pool
- P021 True Blue/ Safety- Pool
- P276 Safety Red-Pool
- P001 Tnemec White- Pool
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Finish
Satin
Volatile Organic Compounds
Unthinned: 0.77 lbs/gallon (92 grams/litre) (TBAc Exempt)
Unthinned: 1.03 lbs/gallon (123 grams/litre)
Thinned 5% (No. 49 Thinner): 1.03 lbs/gallon (123 grams/litre)
Thinned 10% (No. 4 Thinner): 1.50 lbs/gallon (179 grams/litre) (TBAc Exempt)
Thinned 10% (No. 4 Thinner): 1.70 lbs/gallon (204 grams/litre) †
Theoretical Coverage
1,059 mil sq ft/gal (26.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
HAPS
Unthinned: 0.10 lbs/gal solids
Thinned 5% (No. 49 Thinner): 0.10 lbs/gal solids
Thinned 10% (No. 4 Thinner): 0.94 lbs/gal solids
Topcoats
Series 21, 22, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 73, 104, 113, 114, 118, 141, 156, 157, 161, 180, 181, 287, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1077, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: The following recoat times apply for Series L69F: Immersion Service—Surface must be scarified after 30 days. Atmospheric Service—After 30 days, scarification or an epoxy tie-coat is required. Contact your Tnemec representative for specific recommendations.
Primers
Steel: Self-priming or Series 1, 27, 37H, 66, L69, N69, N69F, V69, V69F, 90E-92, 90G-1K97, 90-97, H90-97, 90-98, 91-H₂O, 94-H₂O, 135, 161, 394
Galvanized Steel and Non-Ferrous Metal: Series 66, L69, N69, V69, 1224.
Concrete: Self-priming or Series 130, 1254
CMU: Self-priming or Series 130, 1254
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
Volume Solids
66.0 ± 2.0% (mixed) †
Recommended DFT
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: The number of coats and thickness requirements will vary with substrate, application method, and exposure. Contact your Tnemec representative.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep