Series 22
Epoxoline
Generic Type
Modified Polyamine Epoxy
Common Usage
An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service in potable water and wastewater environments. Specialized curing mechanism allows for faster cure response with airless spray application.
Special Qualifications
Series 22-WH11 Off-White, 22-1218 Light Blue and 22-1255 Beige are certified by NSF International in accordance with NSF/ANSI/CAN Std. 61 and the extraction requirements of NSF/ANSI/CAN 600. Reference Tnemec’s certified product listing at www.nsf.org for details on the maximum allowable DFT. Series 22 conforms to AWWA C 210.
This product is part of a coating system tested in accordance with ISO 12944-6 (2018). Contact your Tnemec representative for coating system test results.
View more product detailsProduct Data Sheets
- English_Series_22_Epoxoline_pds.pdf
- French_Series_22_Epoxoline_pds.pdf
- Spanish_Series_22_Epoxoline_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Finish
Semi-Gloss
Recommended DFT
16 to 40 mils (400 to 1015 microns). Note: For multiple coat applications a minimum 12.0 mils (305 microns) per coat is required. Note: Reference the NSF website at www.nsf.org for details on the maximum allowable DFT.
Number of Components
Two: Part A (polyamine) and Part B (epoxy)
Volume Solids
100% (mixed) †
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Primers
Steel: Self-priming, 21, 66, L69, L69F, N69, N69F, 90-97, H90-97, 90G-1K97, 91-H₂O, 94-H₂O, 98-H₂O, L140, L140F, N140, N140F, V140, V140F, 161. Note: The following maximum recoat time applies: over Series 21, 14 days; over Series 66, L69, N69, L140, N140, V140 or 161, 60 days; over Series L69F, N69F, V69F, L140F, N140F or V140F, 30 days; Series 98-H₂O, 1 year. If the maximum recoat time has been exceeded, the primed surface must be scarified prior to topcoating with Series 22.
Topcoats
Series 73, 700, V700, 701, V701, 1028, 1029, 1074, 1074U, 1075, 1075U, 1080, 1081, 1094, 1095, 1096. Note: Series 22 exterior (sunlight) exposed for longer than maximum recoat requires scarification by abrasive blasting prior to topcoating.
Curing Time
| Temperature | To Touch | Dry Through | Minimum to Recoat | Return to Service | Maximum to Recoat |
|---|---|---|---|---|---|
| 95°F (35°C) | 2 1/2 hours | 5 1/2 hours | 4 hours | 5 days | 7 days |
| 75°F (24°C) | 7 hours | 18 hours | 16 hours | 5 days | 7 days |
| 50°F (10°C) | 24 hours | 27 hours | 32 hours | 7 days | 7 days |
Note: These cure times are based on 20.0 mil (500 micron) dry film thickness. Cure time varies with surface temperature, air movement, humidity, and film thickness. Ventilation: When used as a tank lining or in enclosed areas, provide adequate ventilation during application and cure.
HAPS
Unthinned: 0.0 lbs/gal solids
Thinned 5%: 0.37 lbs/gal solids
Volatile Organic Compounds
Unthinned: 0.10 lbs/gallon (12 grams/litre)
Thinned 5%: 0.44 lbs/gallon (52 grams/litre) †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep