Series 90G-1K97
Tneme-Zinc
Generic Type
Aromatic Polyurethane, Zinc-Rich
Common Usage
An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.
Special Qualifications
90G-1K97 Tneme-Zinc uses a pigment which meets the requirements of ASTM D 520 Type III and contains less than .002% lead. This level qualifies it to be classed as "non-lead" (less than 0.009% lead by weight) as defined in 16 CFR Part 1303 of the Consumer Product Safety Commission regulations. Conforms to SSPC Paint 20, Type II.
View more product detailsProduct Data Sheets
- English_Series_90G_1K97_Tneme_Zinc_pds.pdf
- French_Series_90G_1K97_Tneme_Zinc_pds.pdf
- Spanish_Series_90G_1K97_Tneme_Zinc_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
HAPS
Unthinned: 5.20 lbs/gal solids
Thinned 1.9%: 5.42 lbs/gal solids (No. 2 Thinner); 5.21 lbs/gal solids (No. 3 Thinner)
Thinned 10%: 6.37 lbs/gal solids (No. 2 Thinner); 5.24 lbs/gal solids (No. 3 Thinner)
Curing Time
| Temperature † | To Handle | To Recoat |
|---|---|---|
| 75°F (24°C) | 2 hours | 8 hours |
| 55°F (11°C) | 4 hours | 12 hours |
| 35°F (2°C) | 6 hours | 16 hours |
† 50% relative humidity. Curing time varies with surface temperature, air movement, humidity and film thickness.
Ventilation: When used in enclosed areas, provide adequate ventilation during application and cure. Note: For faster curing, low humidity and low-temperature applications, add No. 44-710 Urethane Accelerator (see separate product data sheet).
Volume Solids
62.0 ± 2.0%
Recommended DFT
2.5 to 3.5 mils (65 to 90 microns) per coat.
Topcoats
Series 1, 6, 27, 27WB, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 73, 84, 104, 113, 114, 115, 135, 161, 290, 291, 394, 740, 750, 1028, 1029, 1074, 1074U, 1075, 1075U, 1077, 1078. Note: Certain topcoat colors may not provide one-coat hiding depending on method of application. Note: Series 90G-1K97 must be exterior exposed for three days prior to topcoating with Series 6, 1028 or 1029. Note: Series 90G-1K97 must be exterior exposed for one day prior to topcoating with Series 27WB.
Theoretical Coverage
996 mil sq ft/gal (24.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components
One
Volatile Organic Compounds
Unthinned: 2.75 lbs/gallon (330 grams/litre)
Thinned 1.9%: 2.83 lbs/gallon (340 grams/litre)
Thinned 10%: 3.16 lbs/gallon (379 grams/litre)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep