Series 1094
Endura-Shield
Generic Type
Aliphatic Acrylic Polyurethane
Common Usage
A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
Special Qualifications
Series 1094 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High-Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
Series 1094 meets the accelerated weathering requirements of SSPC-Paint 36 (level 3A) Paint Standard.
View more product detailsProduct Data Sheets
- English_Series_1094_Endura_Shield_pds.pdf
- French_Series_1094_Endura_Shield_pds.pdf
- Spanish_Series_1094_Endura_Shield_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Number of Components
Two: Part A and Part B
Recommended DFT
Topcoat Service: 2.0 to 5.0 mils (51 to 127 microns) per coat.
Direct-to-Metal; over Zinc or MIO-Zinc: 3.0 to 6.0 mils (76 to 154 microns).
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. For DTM or applications over zinc or MIO-zinc, consult the latest version of Tnemec Technical Bulletin 13-100 or contact your Tnemec representative.
Curing Time
| Temperature | To Touch | To Handle | To Recoat |
|---|---|---|---|
| 75°F (24°C) | 1-2 hours | 9 hours | 10-12 hours |
To resist moisture: 8 hours. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster cure in temperatures down to 35°F (2°C), add No. 44-456 Urethane Accelerator, see separate product data sheet for cure information. Note: The use of Series 44-456 accelerator is not recommended when temperatures exceed 75°F (24°C).
Primers
Steel: Self-priming or Series 1, 27, 66, L69, L69F, N69, N69F, V69, V69F, 90-75, 90-97, 90G-1K97, 91-H₂O, 94-H₂O, 98-H₂O, 104, 132, 133, 135, 138, L140, L140F, N140, N140F, 141, 161, 394, 1220, 1224.
Galvanized Steel & Non-Ferrous Metal: Series 66, L69, N69, V69, 1224. Note: For special galvanized surface preparation instructions, consult the latest version of Tnemec Technical Bulletin 10-78.
Concrete: Series 66, L69, L69F, N69, N69F, V69, V69F, L140, L140F, N140, N140F, 141, 161, 1224, 1254.
CMU: Series 1254.
Note: The following maximum recoat times apply; Series 141, 7 days; Series L69F, N69F, V69F, L140F, or N140F, 14 days; Series L69, N69, V69, L140, or N140, 21 days; Series 1, 27, 66, 104, 135, 161, 1254, 30 days; Series 132, 133, 138; 90 days, Series 394, 1220, 1224, 12 months. Series 90-75, 90-97, 90G-1K97, 91-H₂O, 94-H₂O, 98-H₂O, unlimited. Contact your Tnemec representative for specific recommendations.
Theoretical Coverage
964 mil sq ft/gal (23.6 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volatile Organic Compounds
Unthinned: 0.63 lbs/gal (75 grams/litre) (TBAc Exempt)
Unthinned: 2.16 lbs/gal (259 grams/litre)
Thinned 10% (No. 10 Thinner): 1.60 lbs/gal (191 grams/litre) (TBAc Exempt)
Thinned 10% (No. 10 Thinner): 2.77 lbs/gal (332 grams/litre)
Thinned 10% (No. 46 Thinner): 0.69 lbs/gal (82 grams/litre) (TBAc Exempt)
Thinned 10% (No. 46 Thinner): 2.20 lbs/gal (263 grams/litre)
HAPS
Unthinned: 0.0 lbs/gallon solids
Thinned 10% (No. 10 Thinner): 0.03 lbs/gallon solids
Thinned 10% (No. 46 Thinner): 0.07 lbs/gallon solids
Finish
Gloss
Volume Solids
60.0 ± 2.0% (mixed) †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep