Series 233
Power-Tread LE
Generic Type
Modified Polyamine Epoxy
Common Usage
A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
Special Qualifications
Series 233 was tested in accordance with, and passed, the California Dept. of Public Health (CDPH) Standard Method v1.2 and meets the requirements of LEED v4.1 Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, Living Building Challenge Materials Petal 10, and WELL Building Standard v2 X06 VOC Restrictions.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 05BL Gainesboro
- 25BL Fountain Bleu
- 42BL Blue Channel
- 04BR Desert Sands
- 15BR Pale
- 68BR Twine
- 91GN Balsam
- 31GR Slate Gray
- 33GR Gray
- 35GR Black
- 46GR Sinker
- 28RD Monterrey Tile
- 02SF Lemon Yellow/Safety
- 17SF Candy Apple Red/Safety
- 00WH White
- Clear
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Self-priming or Series 201, 208, 237, 238 or 241
Surfacer/Filler/Patcher
Series 206, 215. Note: A repair kit of 201, 208 or 233 with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Finish
Gloss
Number of Components
Two: Part A and Part B (3 Parts A to 1 Part B by volume)
Volume Solids
100% (mixed)
Theoretical Coverage
1,604 sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Topcoats
Series 206, 206SC, 230ESD, 233, 237, 237SC, 238, 247, 248, 252SC, 256, 257, 280, 280FC, 281, 282, 284, 285, 286, 290, 291, 294, 295, 296 or 297. Note: A 72 hour maximum recoat time applies when topcoating Series 233. Note: If Series 233, 247 (clear), 248 (clear), 285, 294, 295 or 296 is selected for the finish coat over a decorative broadcast system, an intermediate coat of Series 233 (clear), 237 (clear), 238 (clear) or 284 is required. If Series 247 (tinted), 248 (tinted), 290, 291 or 297 is selected for the finish coat over a broadcast system, a grout coat of Series 233 (tinted) 237 or 238 (tinted), 280, 280FC or 281 is required.
Recommended DFT
Primer: 3.0 to 12.0 mils (75 to 300 microns) per coat.
Broadcast: 1/16" to 1/8" (Double broadcast or slurry broadcast required to achieve 1/8"). Mortar: 3/16” to 1/4” thickness.
Grout coat: 8.0 to 16.0 mils (203 to 406 microns).
Intermediate or Topcoat: 8.0 to 16.0 mils (203 to 406 microns).
Volatile Organic Compounds
0.02 lbs/gallon (2 grams/litre)
Curing Time
| Temperature | To Topcoat/Broadcast | To Place in Service | Maximum Recoat |
|---|---|---|---|
| 75°F (24°C) | 12 to 72 hours | 24 hours | 72 hours |
Note: There is no maximum recoat time if aggregate has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep