- Home
- Products
-
DOWNLOAD DATA SHEET
Series 201 | Epoxoprime
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer. Excellent chemical resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 205 | Terra-Tread FC
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyamide Epoxy
- Finish Pigmented: Satin Clear: Gloss
A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as 35°F (2°C).
-
DOWNLOAD DATA SHEET
Series 206 | Sub-Flex EP
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Flexible Epoxy
Flexible epoxy underlayment for bridging small substrate cracks in concrete and to provide a protective waterproof membrane under aggregate reinforced flooring systems. This flexible basecoat is capable of withstanding 50 mils of differential movement without damaging the system.
-
DOWNLOAD DATA SHEET
Series 206SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
- For Concrete
- Generic Description Modified Flexible Polyamine Epoxy
Glass-reinforced, flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC, and 252SC when a flexible basecoat is desired.
-
DOWNLOAD DATA SHEET
Series 208 | Epoxoprime MVT
- Uses Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
Epoxoprime MVT is a unique, moisture-tolerant, two component, low viscosity, high solids epoxy primer designed to reduce moisture vapor emissions and provide alkalinity control for concrete with elevated moisture vapor transmission levels that exceed the acceptable limits of non-breathing resilient and polymer floor topping finishes. Epoxoprime MVT can be applied to properly prepared, 10 day old concrete and withstands moisture vapor transmission up to 15 lbs (per ASTM F 1869) and relative humidity up to 95% (per ASTM F 2170). Epoxoprime MVT has a low perm rating (0.05 perm) and is alkaline insensitive to pH levels of 14.
-
DOWNLOAD DATA SHEET
Series 210 | Even-Flow SL
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aggregate-Filled Modified Polyamine Epoxy
- Finish Gloss
A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.
-
DOWNLOAD DATA SHEET
Series 222 | Deco-Tread
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
A low ambering, multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat, and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series N222 | Deco-Tread
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N222 can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat, and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 223 | Deco-Trowel
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
- Finish Decorative quartz—multi-colored appearance. The finished appearance and texture will depend on the type, film thickness and number of clear finish coats selected.
A low ambering, decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. Protects against impact, abrasion and has very good chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series N223 | Deco-Trowel
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N223 is a decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 224 | Deco-Fleck
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Decorative Flake-Filled Modified Polyamine Epoxy
- Finish Decorative flake—multi-colored appearance. The finished appearance will depend on the number, type and film thickness of the clear finished coats selected.
A low ambering, customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. Protects against abrasion and mild chemicals with an aesthetically pleasing speckled appearance.
-
DOWNLOAD DATA SHEET
Series N224 | Deco-Fleck
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Decorative Flake-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N224 is a customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 233 | Power-Tread LE
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
-
DOWNLOAD DATA SHEET
Series 237 | Power-Tread
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
-
DOWNLOAD DATA SHEET
Series 237SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
A multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 238 | Power-Tread FC
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Fast-Cure Epoxy
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.
-
DOWNLOAD DATA SHEET
Series 239SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
- Generic Description Modified Novolac Polyamine Epoxy
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 241 | Ultra-Tread MVT
- Uses Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Polyurethane Modified Concrete
Ultra-Tread MVT is a low odor, slurry applied, high performance moisture control base layer designed to reduce moisture vapor emissions prior to the application of non-breathing, polymer floor topping finishes. Ultra-Tread MVT is a self-priming, base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170). Note: Series 241 must be broadcast to refusal with aggregate, color quartz or decorative flake typically completed within 10 to 15 minutes of application. Color quartz and/or decorative flake systems will require an additional broadcast layer using Series 222, 224, 237, 238, 256, 257 or 286, clear to obtain a uniform appearance and texture before applying the desired clear finish coats. This will typically result in a total system thickness of approximately 1/8".
-
DOWNLOAD DATA SHEET
Series 242 | Ultra-Tread S
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
-
DOWNLOAD DATA SHEET
Series 243 | Ultra-Tread V
- Uses Flooring
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread V is a low-odor mortar designed for troweling vertical surfaces such as trenches and equipment pads, and for building cove base. It should be used for vertical application needs in conjunction with horizontal applications of Series 242 Ultra-Tread S, Series 244 Ultra-Tread M or Series 245 Ultra-Tread S. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity.
-
DOWNLOAD DATA SHEET
Series 244 | Ultra-Tread M
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread M is a low odor, mortar applied floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread M is a self-priming mortar that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
-
DOWNLOAD DATA SHEET
Series 245 | Ultra-Tread S
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
-
DOWNLOAD DATA SHEET
Series 246 | Ultra-Tread Glaze
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyurethane
- Finish Matte
Ultra-Tread Glaze is a pigmented, high-build, low odor, polyurethane coating. Typically used as a topcoat for sealing or locking aggregate in Series 242 Ultra-Tread S or Series 245 Ultra-Tread S broadcast texture finishes. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity.
-
DOWNLOAD DATA SHEET
Series 247 | EverThane
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane
- Finish Gloss
Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space. Note: For horizontal surfaces only.
-
DOWNLOAD DATA SHEET
Series 248 | EverThane
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane
- Finish Semi-gloss. *Note:* The gloss level can be reduced by adding two Part C filler components to each kit.
Extremely hard, chemical-resistant urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space.
-
DOWNLOAD DATA SHEET
Series 249ESD | Static-Shield UR
- Uses Flooring
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane - Electrostatic Dissipative
Extremely hard, chemical-resistant, electrostatic dissipative urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Commonly used in facilities that manufacture, process, assemble, package, service, inspect or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges which have established, implemented and maintain an Electrostatic Discharge (ESD) Control Program. Also used in data centers, clean room/labs, computer rooms, military/aerospace, avionics, automotive manufacturing or any environments where electrostatic discharge (ESD) is a nuisance or may have damaging effects. Ensures permanent and uniform electrical conductivity eliminating “hot spots". Designed for static dissipative resistance in the range of 1x10^6^ to 1x10^9^ (one million to one billion) ohms surface resistance when testing point to point/point to ground for establishing floor resistance values per ANSI/ESD S20.20. Project specifications and application specifics should clearly indicate what resistance range is required. Note: Not intended for industries requiring protection against explosion hazards such as dust, fuels, and solvents or electrically initiated explosive compounds and devices.
-
DOWNLOAD DATA SHEET
Series 251SC | ChemBloc
- Uses Primer and/or Block Fillers, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 252SC | ChemBloc
- Uses Linings & Secondary Containment, Top and Finish Coats
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 256 | ExcellaThane
- Uses Intermediate Coats, Top and Finish Coats
- For Concrete
- Generic Description Modified Aliphatic Polyaspartic
- Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.
An extremely fast-curing, multi-purpose and finish coat resin with low temperature cure capability. Used to build aggregate, colored quartz or decorative flake filled floor topping systems. It can also be used as a clear or pigmented finish coat over systems built using Series 256 or systems built using epoxy, or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 256 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
-
DOWNLOAD DATA SHEET
Series 257 | ExcellaThane SS
- Uses Intermediate Coats, Top and Finish Coats
- For Concrete
- Generic Description Modified Aliphatic Polyaspartic
- Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.
A slower setting Polyaspartic floor coating, offering longer working time and lower viscosity. Series 257 minimizes the potential for lap marks and roller lines when used in large flooring applications. It can be used as a two coat thin-film system or as a clear or pigmented finish coat over systems built using epoxy or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 257 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
-
DOWNLOAD DATA SHEET
Series 270 | Stranlok
- Uses Intermediate Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete
- Generic Description Polyamine Epoxy
A high-performance, fiberglass-reinforced wall coating for protection against acids, alkalis and physical abuse. Stranlok’s 100% solids epoxy technology is solventless and VOC compliant, making Stranlok virtually odorless and permitting application in occupied facilities. Its accelerated curing schedule and installation process mean faster return-to-service times. A unique blend of two types of premixed reinforcing fibers allows Stranlok to be spray or trowel applied up to 40 mils. The integrity of the interlocking fibers allows the surface to withstand daily high-pressure steam cleaning. In addition to this high tolerance to “thermal shock,” Stranlok also features broad chemical, impact and abrasion resistance.
-
DOWNLOAD DATA SHEET
Series 273 | Stranlok ML
- Uses Intermediate Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
A fiberglass mat reinforced coatings system for walls and ceilings providing cleanability and protection against chemical and physical abuse. Provides a high-performance, smooth, seamless surface with excellent chemical, stain, impact and abrasion resistance.
-
DOWNLOAD DATA SHEET
Series 280 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 280FC | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 281 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A high-gloss, glaze-like coating for concrete floors. It imparts a smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.
-
DOWNLOAD DATA SHEET
Series 282 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Polyamine Novolac Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.
-
DOWNLOAD DATA SHEET
Series N283 | Coving Resin
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A clear, thixotropic binder resin. Series N283 is designed to be used in all phases of cove building or vertical trowel applications (priming, base coat, and topcoat) and it can also be used for concrete repair. Note: When using Series N283 for building cove or troweled wall applications an aggregate similar to 30/50 mesh silica sand, Series 222 or 223 Quartz must be used. Has excellent adhesion, good chemical resistance, repairs concrete, and can be applied up to 1/4” without sagging.
-
DOWNLOAD DATA SHEET
Series 284 | Deco-Clear
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. The texture of the finished surface depends on the number of coats applied.
A low ambering, clear finish for decorative flooring systems. It protects against mild chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.
-
DOWNLOAD DATA SHEET
Series N284 | Deco-Clear
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. The texture of the finished surface depends on the number of coats applied.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N284 is a clear finish for decorative flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 285 | Satinglaze
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Orange Peel
A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake filled flooring systems. Coves and Vertical Surfaces: Series 285 can be used to build grout and seal vertical surfaces such as 4” base and wainscot.
-
DOWNLOAD DATA SHEET
Series N285 | Satinglaze
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss - Orange Peel
A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake-filled flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance. Coves and Vertical Surfaces: Series N285 can be used to build grout and seal vertical surfaces such as 4” base and wainscot.
-
DOWNLOAD DATA SHEET
Series 286 | Deco-Clear CR
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Novolac Polyamine Epoxy
- Finish Gloss. The texture of the finished surface depends on the number of coats applied.
A clear novolac finish for decorative flooring systems. It protects against harsh chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.
-
DOWNLOAD DATA SHEET
Series 287 | Enviro-Pox
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Epoxy-Amine Adduct
- Finish Semi-gloss
A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate chemical and solvent exposures, as well as repeated cleaning. Can also be used as a primer or intermediate coat for thin film epoxy and urethane and acrylic systems.
-
DOWNLOAD DATA SHEET
Series 290 | CRU
- Uses Flooring, Top and Finish Coats
- For Steel, Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Semi-Gloss
Extremely hard, chemical-resistant urethane coating for applications in commercial, industrial, and marine environments with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried finishes.
-
DOWNLOAD DATA SHEET
Series V290 | CRU
- Uses Flooring, Top and Finish Coats
- For Steel, Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Semi-Gloss
Extremely hard, chemical-resistant urethane coating with excellent resistance to abrasion, wash down conditions, corrosive fumes, and chemical contact. Gloss retention is among the best of air-dried finishes.
-
Series 291 | CRU
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
Extremely hard, chemical-resistant polyurethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss and color retention among the best of air dried finishes. Note: For horizontal surfaces only.
-
Series 294 | Clear CRU
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Low semi-gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
Durable, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Typically used over epoxy and urethane flooring systems for increased abrasion and chemical resistance and a low-sheen appearance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
-
Series 295 | Clear CRU
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
Extremely hard, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has superb flow characteristics, excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss among the best of air dried finishes. Typically used over epoxy and urethane flooring systems for increased abrasion and chemical resistance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
-
DOWNLOAD DATA SHEET
Series 296 | Enviro-Glaze Clear
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Ceramic-Modified Waterborne Aliphatic Polyurethane
- Finish Gloss
A clear, low odor, fast dry, low VOC, waterborne polyurethane floor coating for interior wall and floor applications. Provides enhanced abrasion resistance and stain resistance. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.
-
DOWNLOAD DATA SHEET
Series 297 | Enviro-Glaze
- Uses Flooring, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Ceramic-Modified Waterborne Aliphatic Polyurethane
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Low odor, fast dry, low VOC, waterborne polyurethane coating for wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.