- Home
- Products
-
Series 30 | Spra-Saf EN
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Other
- Generic Description Hydrophobic Acrylic Polymer
- Finish Satin
- This product has been discontinued. Please contact your local sales representative for further assistance.
An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early flash-rust resistance, as well as long term corrosion protection and weathering properties. Formulated to resist mildew growth on the paint film. Provides good gloss and color retention on structural steel, tanks, towers, pipes and similar structures. May also be used on a wide range of other substrates and many aged coatings, interior or exterior (test patch is recommended per Technical Bulletin 98-10). Application methods include “dry-fall” under certain conditions (see Application). Note: Spra-Saf EN’s “dry-fall” characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 43-236 | Fast Dry Aluminum
- Uses Top and Finish Coats
- For Steel
- Generic Description Copolymer Aluminum
- Finish Semi-Gloss
Fast drying spray-applied coating offering good protection for most exterior weathering conditions. Note: Series 43-236's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 51 | PVA Sealer
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum
- Generic Description Vinyl Acrylic
A waterborne primer-sealer for uncoated drywall in interior dry environments.
-
DOWNLOAD DATA SHEET
Series 54 | Masonry Filler
- Uses Primer and/or Block Fillers
- For Masonry & Stucco, Concrete
- Generic Description Vinyl Acrylic Latex Block Filler
- Finish Flat
Single component coating for filling surface voids in porous concrete and masonry block on interior, dry, above-grade masonry surfaces.
-
DOWNLOAD DATA SHEET
Series 115 | Uni-Bond DF
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Self-crosslinking Hydrophobic Acrylic
- Finish Eggshell
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series V115 | Uni-Bond DF
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Self-crosslinking Hydrophobic Acrylic
- Finish Eggshell
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 118 | Uni-Bond Mastic
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Mastic Waterborne Acrylic
- Finish Matte
A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.
-
DOWNLOAD DATA SHEET
Series 130 | Envirofill
- Uses Primer and/or Block Fillers
- For Masonry & Stucco, Concrete
- Generic Description Waterborne Cementitious Acrylic
Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals and primes surface for application of a variety of high performance water- and solvent-based topcoats in moderately severe exposures.
-
DOWNLOAD DATA SHEET
Series 154 | TnemeGuard
- Uses Flooring
- For DryWall and Gypsum, Concrete, Other
- Generic Description Mastic Waterborne Acrylic
- Finish Matte
Series 154 is a durable, single-component, water-based elastomeric coating that forms a waterproof film over horizontal or vertical concrete surfaces as well as various types of wallboard, wood and tile. It is an excellent choice for areas that receive light to moderate traffic including balconies, walkways, pedestrian bridges, mechanical equipment rooms and other surfaces such as concrete decks that may require protection from weather or water intrusion. Versatile application characteristics allow Series 154 to be applied neat, as a broadcast system, or mixed with aggregate and either applied as slurry or used as a surfacer or filler. Series 154 can also be reinforced using woven or octagonal mesh inlays where crack-bridging or extra durability is needed.
-
DOWNLOAD DATA SHEET
Series 156 | Enviro-Crete
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Modified Waterborne Acrylate
- Finish Matte — Smooth
Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light. Series 156 can also be used as a low cohesive stress overcoat for aged oil or alkyd systems.
-
DOWNLOAD DATA SHEET
Series 157 | Enviro-Crete
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Modified Waterborne Acrylate
- Finish Matte — Sand Texture
Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light.
-
DOWNLOAD DATA SHEET
Series 158 | Bio-Lastic
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Other
- Generic Description Specialized Waterborne Acrylate
- Finish Matte
A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent scrubbing and cleaning.
-
DOWNLOAD DATA SHEET
Series 180 | W.B. Tneme-Crete
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Acrylic Emulsion
- Finish Flat, smooth
Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application "dry-falls" under certain conditions.
-
DOWNLOAD DATA SHEET
Series 181 | W.B. Tneme-Crete
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Acrylic Emulsion
- Finish Flat, sand texture
Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application “dry-falls” under certain conditions.
-
Series 607 | Conformal Stain
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Methylmethacrylate Acrylic/Hydrophobic Fumed Silica
This product has been discontinued. Please refer to Series 617 | Conformal Stain WB for a suitable alternative, or contact your Tnemec Sales Representative
Conformal Stain is a penetrating, solvent-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain exhibits excellent color stability and is designed not to peel or flake when applied to a properly prepared substrate. Repels water when used on dense substrates.
-
DOWNLOAD DATA SHEET
Series 617 | Conformal Stain WB
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description 100% Acrylic Polymer
Conformal Stain WB is a penetrating, water-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain WB exhibits excellent color stability, and is designed not to peel or flake when applied to a properly prepared substrate. Conformal Stain WB provides color uniformity by correcting color imperfections often found in integrally colored concrete masonry, natural stone, tilt-up and precast panels. Repels water when used on dense substrates. Conformal WB is mildew resistant and contains agents that inhibit the growth of mildew on the surface of the stain.
-
Series 620 | Phylon 1422
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Methylmethacrylate Acrylic
- This product has been discontinued. Please contact your local sales representative for further assistance.
Phylon 1422 is a non-yellowing, acrylic coating that highlights the natural color of masonry by providing a clear, semi-gloss sheen. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Phylon 1422 provides a durable, wet-look finish to exposed aggregate, ground-face block, sandblasted concrete and many other vertical concrete, masonry and natural stone surfaces. Repels water when used on dense substrates.
-
Series 621 | Phylon WB
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description 100% Acrylic Polymer
- This product has been discontinued. Please contact your local sales representative for further assistance.
Phylon WB is a non-yellowing, water-based, acrylic coating that highlights the natural color of masonry by providing a clear, gloss sheen. Its special formulation provides a hard, durable gloss finish. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Phylon WB provides a durable, wet-look finish to exposed aggregate, ground-face block, sandblasted concrete and many other vertical concrete, masonry and natural stone surfaces.
-
Series 624 | Phylon
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Acrylic Copolymer Blend
- This product has been discontinued. Please refer to Series 620 | Phylon 1422 for a suitable alternative, or contact your local sales representative for further assistance.
Phylon 624 is a unique acrylic copolymer, formulated to meet VOC requirements for curing compounds. Phylon 624 is a non-yellowing curing, sealing, hardening, dust proofing and water repellent compound that exhibits a tough, long lasting, glossy film. Phylon 624 is designed for use on exterior and interior slabs as well as above grade architectural concrete.
-
Series 625 | Conformal Clear
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Methylmethacrylate Acrylic/Hydrophobic Fumed Silica
- This product has been discontinued. Please contact your local sales representative for further assistance.
Conformal Clear is a penetrating, solvent-based masonry coating for virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Clear is designed to darken and highlight the substrate and will not peel or flake. Conformal Clear is compatible with most caulking and sealing compounds. Repels water when used on dense substrates.
-
DOWNLOAD DATA SHEET
Series 975 | Aerolon
- Generic Description Fluid-applied acrylic insulation coating
- Finish Matte
An innovative, fluid-applied, thermal insulating coating ideal for insulating pipes, valves, tanks, structural steel, or other substrates where thermal improvement, condensation reduction, or personnel protection is desired. This unique formulation is highly filled with a hydrophobic, insulative particle offering exceptional thermal performance and features a durable, water-based resin system with excellent adhesion and durability. Part of a corrosion-resistant coating system that bonds to the substrate, greatly reducing the issues associated with corrosion under insulation (CUI), and mitigating thermal bridging by controlling condensation.
-
DOWNLOAD DATA SHEET
Series 1026 | Enduratone
- Uses Intermediate Coats, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Acrylic Emulsion
- Finish Matte
A durable, easy-to-use, water-based acrylic coating that offers long-wearing protection to a variety of substrates. Excellent as a topcoat or intermediate-coat on anti-corrosive steel coating systems or when applied to concrete and drywall. Easy to apply by brush, roller, and spray, this product’s low odor and low VOC qualities make it versatile choice on architectural and industrial projects. Note: Application methods include “dry-fall” under certain conditions (see application).
-
DOWNLOAD DATA SHEET
Series 1028 | Enduratone
- Uses Intermediate Coats, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description HDP Acrylic Polymer
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 1028T | Enduratone
- Uses Insulating, Top and Finish Coats
- For Steel
- Generic Description HDP Acrylic Polymer
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. Contains ceramic spheres for enhanced thermal stability. May be applied by spray, brush or roller over Aerolon insulative coating systems. It is mildew resistant and exhibits very good gloss and color stability.
-
DOWNLOAD DATA SHEET
Series 1029 | Enduratone
- Uses Intermediate Coats, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description HDP Acrylic Polymer
- Finish Low semi-gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
Series 1552 | Endura-Heat
- Uses High Temp, Top and Finish Coats
- For Steel
- Generic Description Acrylic Silicone Copolymer
- Finish Matte
- This product has been discontinued. Please contact your local sales representative for further assistance.
A heat-resistant, acrylic silicone topcoat available in a wide range of colors using thermally stable pigments for temperatures up to 500°F (260°C), and black, aluminum, or limited gray colors up to 800°F (426°C). This topcoat is used as the finish to high-temperature coating systems, imparting excellent resistance to weathering and UV-light degradation. Ambient, air-dried cure.