- Home
- Products
-
DOWNLOAD DATA SHEET
Series 46-465 | H.B. Tnemecol
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Coal Tar
- Finish Semi-gloss
Versatile coal tar coating for use in immersion, splash and spillage, chemical fumes and below-grade environments.
-
DOWNLOAD DATA SHEET
Series 46H-413 | Hi-Build Tneme-Tar
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy-Coal Tar
- Finish Semi-gloss
High-build corrosion resistant coating providing one coat protection for concrete and steel in a variety of chemical, immersion and underground conditions. Also, when a two-coat application is desired, a low film build option is possible.
-
DOWNLOAD DATA SHEET
Series 61 | Tneme-Liner
- Uses Linings & Secondary Containment
- For Steel, Masonry & Stucco, Concrete
- Generic Description Cycloaliphatic Amine Epoxy
- Finish Semi-gloss
Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion service, including fuel and crude oil storage, fuel pipelines, chemical containment and wastewater treatment.
-
DOWNLOAD DATA SHEET
Series 206SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
- For Concrete
- Generic Description Modified Flexible Polyamine Epoxy
Glass-reinforced, flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC, and 252SC when a flexible basecoat is desired.
-
DOWNLOAD DATA SHEET
Series 239SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
- Generic Description Modified Novolac Polyamine Epoxy
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 251SC | ChemBloc
- Uses Primer and/or Block Fillers, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 252SC | ChemBloc
- Uses Linings & Secondary Containment, Top and Finish Coats
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 262 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
- Finish Gloss. *Note:* Prolonged exterior exposure will cause flattening of the finish.
Chemical- and abrasion-resistant elastomeric membrane with exceptional strength and flexibility. Ideally suited for environmental requirements of waste containment for primary or secondary containment. Spray applied, it forms the monolithic, impermeable liner required for earth collection and catch basins, decorative ponds and fountains, reservoirs, cooling towers, dams and spillways.
-
DOWNLOAD DATA SHEET
Series 264 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
- Finish Gloss. *Note:* Prolonged exterior exposure will cause flattening of the finish.
Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and secondary chemical containment.
-
DOWNLOAD DATA SHEET
Series 307 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Polyamine Epoxy
- Finish Semi-gloss
A versatile, high-build, epoxy internal lining applied in a single coat by plural component equipment. Its enhanced chemical resistance and physical properties make it an excellent, cost-effective choice for corrosion control in tanks handling brine water, drilling mud, mild temperature backflow, and a wide range of chemicals used in the oil and gas industry. Series 307 contains micro-fiber reinforcement for enhanced film integrity.
-
DOWNLOAD DATA SHEET
Series 312 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Polyamine Epoxy
A convenient, easy to use touch-up kit, ideal for small repairs and holidays. Packaged in a two-part dispenser tube that separates resin and hardener and is applied using a high-thrust ratio applicator. Compatible with all Tank Armor products.
-
DOWNLOAD DATA SHEET
Series 322 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, solvent-free, high build epoxy lining for the interior of steel storage tanks and vessels from various cargos including crude oil and finished fuels. Also used to line concrete basins, troughs, and tanks where a coating resistant to chemicals, fuels, and domestic wastewater immersion service is needed. Can be applied with airless spray or plural-component equipment.
-
DOWNLOAD DATA SHEET
Series 335 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Polyamine Epoxy
- Finish Semi-gloss
Internally reinforced, 100% solids epoxy lining that provides protection against corrosion and chemical attack. Specified for use as a protective lining in finished fuels, sweet/sour crude, and brine immersion exposures for above-ground and transport tanks, and pipelines. Series 335 provides long-term durability and corrosion control for extended service life. Also recommended as a liner for tanks and transports containing DEF (Diesel Exhaust Fluid). Contact Tnemec for more information.
-
DOWNLOAD DATA SHEET
Series 340 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Modified Polyamine Epoxy
- Finish Semi-gloss
A thick-film epoxy formulated for corrosion control and internal lining of petroleum storage tanks. Lining may also be used for select chemical storage tanks. Refer to the Tnemec Chemical Resistance Chart.
-
DOWNLOAD DATA SHEET
Series 350 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Modified Phenolic Epoxy
- Finish Semi-gloss
A high-build, tightly cross-linked, high-performance epoxy with excellent resistance to a broad range of chemicals, solvents, and petroleum over a wide range of temperatures. Refer to the Series 350 Chemical Resistance Guide for more information.
-
DOWNLOAD DATA SHEET
Series 365 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Novolac Epoxy
- Finish Semi-gloss
Spray applied, 100% solids, high build, reinforced epoxy formulated for general use as an internal lining for tanks and other aggressive chemical immersion service. Exhibits excellent range of chemical and solvent resistance combined with physical properties for long term durability and service life. Contact Tnemec for more information.
-
DOWNLOAD DATA SHEET
Series 370 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Polyamine Epoxy
- Finish Gloss
An epoxy lining formulated for corrosion control and aggressive chemical immersion in pressurized vessels, pipelines, storage tanks, industrial wastewater, etc. Series 370 exhibits superior resistance to a wide range of chemicals with excellent physical properties for long term durability and service life, and offers convenient airless spray application for both field and shop. Contains micro-fiber reinforcement for improved film integrity. Note: Application, environmental and design factors, chemical temperatures, and chemical mixtures can significantly impact coating performance, so due care should be exercised in the selection and use of the coating. Contact your Tnemec representative to review full project details before coating is selected.
-
DOWNLOAD DATA SHEET
Series 391 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Polyamine Epoxy
- Finish Semi-gloss
An internal epoxy lining formulated for aggressive chemical immersion and corrosion control of chemical tanks. Contains micro-fiber reinforcement for improved film integrity. Series 391 exhibits superior resistance to a wide range of chemicals, acids, and fractionation blends with excellent physical properties for long-term durability and the service life of transport and storage tanks. Contact Tnemec for more information.
-
DOWNLOAD DATA SHEET
Series 396 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Ultra High-Build Reinforced Novolac Epoxy
- Finish Semi-gloss
A thick-film reinforced epoxy internal lining formulated for corrosion control and abrasion resistance in milling and process environments, chemical plants and refineries. Allows for ultra high-build application of 125 mils DFT. Series 396 exhibits superior corrosion and abrasion resistance for pipelines and process and storage tanks.
-
DOWNLOAD DATA SHEET
Series 406 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Aromatic Polyurethane Hybrid
A two-component, fast-setting, monolithic coating designed to provide a durable polyurethane lining in a single-coat, multi-pass spray application applied with plural component equipment. This high-performance coating has excellent chemical, thermal shock, and abrasion resistance. It is ideal for application to steel or concrete in water and wastewater treatment, secondary containment, and for tank linings and bottoms. Recommended for immersion service. Note: All orders are subject to approval based upon project scope, applicator qualification, and appropriate equipment configuration.
-
DOWNLOAD DATA SHEET
Series 431 | Perma-Shield PL
- Uses Linings & Secondary Containment
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Modified Polyamine Ceramic Epoxy
- Finish Gloss
A 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments and exposure to corrosive soils. Provides low permeation to H2S gas, protects against MIC and provides chemical resistance to steel, ductile iron pipe and fittings for severe wastewater or buried exposures. A coal-tar free, resin-rich formulation with low pigment volume concentration (PVC) for maximum performance.
-
DOWNLOAD DATA SHEET
Series 434 | Perma-Shield H2S
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Modified Aliphatic Amine Epoxy Mortar
A 100% solids, hybrid epoxy mortar designed for severe wastewater immersion and fume environments. Specifically formulated to withstand high levels of hydrogen sulfide gas (H2S), sulfuric acid (H2SO4), as well as other gases common to sewer exposures. Aggregate reinforcement provides additional resistance to abrasions and impacts.
-
DOWNLOAD DATA SHEET
Series G435 | Perma-Glaze
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A versatile, thick film, 100% solids, abrasion-resistant lining specifically designed for domestic wastewater immersion and fume environments. Series 435 provides low permeation to H2S gas, protects against MIC and provides chemical resistance to severe wastewater environments. Contains micro-fiber reinforcement for improved film integrity.
-
DOWNLOAD DATA SHEET
Series G436 | Perma-Shield FR
- Uses Linings & Secondary Containment
- For Concrete
- Generic Description Fiber-Reinforced Modified Polyamine Epoxy
- Finish Gloss
A thick film, 100% solids, spray-applied, an abrasion-resistant coating designed for domestic wastewater immersion and fume environments. Provides excellent resistance to H2S gas permeation, protects against MIC, and provides chemical resistance to severe wastewater environments. Fiber reinforcement provides superior physical strength and higher film build.
-
Series 446 | Perma-Shield MCU
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Hydrophobic Aromatic Polyurethane
- This product has been discontinued. Please contact your local sales representative for further assistance.
An advanced technology moisture-cured, hydrocarbon-modified coating providing excellent protection to steel and concrete substrates in wastewater environments. Provides excellent resistance to H2S gas permeation, protects against MIC and provides chemical resistance to domestic wastewater environments. It is user-friendly and rapid curing.
-
DOWNLOAD DATA SHEET
Series 1402 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Vinyl Ester
- Finish Gloss
Series 1402 is a food grade, vinyl ester primer for complete FDA-compliant lining systems in concrete, steel or stainless-steel tanks. Fast-cure characteristics allow for quick application of subsequent coats, limiting downtime and facility disruption. Series 1402 is the only approved primer for the ProPolymer food grade product line. Replaces ProPolymer 4808.
-
DOWNLOAD DATA SHEET
Series 1415 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Semi-gloss
This corrosion resistant resin is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. A versatile selection for many secondary containments and process floors, Series 1415 is best for caustic and high-ph applications, and when used as the base material for silica-free systems. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1415 was formerly ProPolymer 4860.
-
DOWNLOAD DATA SHEET
Series 1416 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
This extremely corrosion resistant coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. Series 1416 is the best selection for strong acid conditions and when temperatures above ambient conditions are expected. Use this product to add specialty mortar powders, to embed glass mats, as a saturant coat, or as a pigmented self-leveling finish coat. Combine with LavaCrete Part C aggregate to create an enhanced corrosion resistant polymer concrete. Series 1416 was formerly ProPolymer 4847.
-
DOWNLOAD DATA SHEET
Series 1418 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description High Temperature Novolac Vinyl Ester
- Finish Semi-gloss
Resistant to very high temperature service and extremely corrosive environments, this coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as "neat" or non-pigmented. Series 1418 is the recommended selection for use in the most chemically demanding environments, such as, wet or dry FGD scrubbers, ductwork and slurry tanks operating in elevated temperature conditions. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1418 was formally ProPolymer 4847HT.
-
DOWNLOAD DATA SHEET
Series 1420 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Matte
Series 1420 is an FDA-compliant, trowel-grade vinyl ester lining suitable for direct-food contact in tanks and vessels. Glass-flake reinforcement provides additional abrasion and permeation resistance in wet slurry or immersion service environments. Series 1420 may be used as a stand-alone lining system or with a gel coat in a multi-coat system. Replaces ProPolymer 4855T.
-
DOWNLOAD DATA SHEET
Series 1422 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1422 is an FDA-compliant, trowel-grade, high temperature lining suitable for tanks and vessels in food grade service environments or where high temperature conditions are required. Highly filled with glass-flake, it is specially formulated for exceptional service in thermal cycling and chemical reaction vessels. Replaces ProPolymer 4865T.
-
DOWNLOAD DATA SHEET
Series 1428 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
An enhanced elevated temperature, novolac vinyl ester, filled with specially treated premium glass flakes. This product has outstanding trowel application properties. Series 1428 is ideal for the rehabilitation of heavily corroded steel substrates and for high film build protection in the most demanding chemically active and corrosive environments. Series 1428 can be used in FGD units for time saving, quick repairs on small areas or used as a complete lining. Formerly ProPolymer 4875T.
-
DOWNLOAD DATA SHEET
Series 1430 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1430 is an FDA-compliant, mineral flake-filled vinyl ester lining for food grade tanks, vessels and other structures. Applied by spray or roller, it can be used as either a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4813S.
-
DOWNLOAD DATA SHEET
Series 1432 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1432 is an FDA-compliant, vinyl ester lining for food grade tanks, vessels and other structures. Highly filled with glass flake, Series 1432 is specially formulated to provide exceptional service in thermal cycling and chemical reaction tanks and vessels. Applied by roller or spray, it may be used as a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4822S.
-
DOWNLOAD DATA SHEET
Series 1436 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Epoxy Novolac Vinyl Ester
- Finish Semi-gloss
A high molecular weight (HMW), elevated temperature-service, glass-flake-filled novolac vinyl ester lining. Can be used as a gel coat, as a stand-alone liner or as part of a full vinyl ester system. Commonly used in high temperature filtration units, bag houses, exhaust and duct work, and as a primary lining for wet chemical services. Formerly ProPolymer 4834S.
-
DOWNLOAD DATA SHEET
Series 1438 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A high-build, novolac vinyl ester, glass-flake filled lining with an enhanced elevated temperature resistance in dry and wet corrosive environments. Series 1438 is ideal for use in flue gas desulfurization (FGD) units, hot duct work, and wet and dry absorbers. Also an outstanding primary lining for many challenging chemical immersion services. Formerly ProPolymer 4844S.
-
DOWNLOAD DATA SHEET
Series 1439 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Abrasion Resistant Novolac Vinyl Ester
- Finish Semi-gloss
An elevated temperature service, high-build novolac vinyl ester, with a proprietary blend of abrasion resistant powders and ceramics. Series 1439 is ideal for use in high wear, high air velocity with heavy particulate suspension and on impingement areas. Series 1439 is an outstanding selection for use in abrasive slurry lining services. Formerly ProPolymer 4844SAR.