An epoxy lining formulated for corrosion control and aggressive chemical immersion in pressurized vessels, pipelines, storage tanks, industrial wastewater, etc. Series 370 exhibits superior resistance to a wide range of chemicals with excellent physical properties for long term durability and service life, and offers convenient airless spray application for both field and shop. Contains micro-fiber reinforcement for improved film integrity. Note: Application, environmental and design factors, chemical temperatures, and chemical mixtures can significantly impact coating performance, so due care should be exercised in the selection and use of the coating. Contact your Tnemec representative to review full project details before coating is selected.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
Number of Components
Two: Part A (epoxy) and Part B (amine).
Unthinned: 0.1 lbs/gal solids
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
20.0 to 40.0 mils (508 to 1016 microns)
Volatile Organic Compounds
EPA Method 24
Unthinned: 0.32 lbs/gallon (38 grams/litre)
Series 215, 217, 218
|Temperature||To Touch||Dry Through||To Place in Service||Max. Recoat|
|75°F (24°C)||3 hours||14 hours||5 days||7 days|
|55°F (13°C)||7 hours||30 hours||14 days||7 days|
Note: If more than 7 days have elapsed between coats, the Series 370 coated surface must be mechanically abraded before topcoating. Curing time will vary with surface temperature, air movement, humidity and film thickness.
Steel: Self-priming or Series 61
Concrete: Self-priming or Series 61, 201
Note: To minimize pinhole formation in the topcoat, it is recommended that concrete substrates be fully resurfaced and/or primed prior to topcoat application.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep