Series 282

Tneme-Glaze

Generic Type

Polyamine Novolac Epoxy

Common Usage

A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.

View more product details

Colors


View Available Colors

View available colors in our Color Tool; you can also select and request color swatches.

Curing Time

Temperature To Topcoat To Place in Service • Full Cure
75°F (24°C) 8-24 hours 24 hours 5 days

If more than 24 hours have elapsed between coats, the Tneme-Glaze coated surface must be mechanically abraded before topcoating. • Note: 24 hour cure provides for traffic, secondary containment and certain mild chemical exposures. Up to five days cure is required for certain severe chemical exposures. Contact your Tnemec representative or Tnemec Technical Services.

Recommended DFT

Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat.
Additional coats may be required for appearance or hiding.

Volatile Organic Compounds

Unthinned: 0.19 lbs/gallon (23 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †

Topcoats

Series 282

Primers

Concrete: Self-priming or Series 27WB, 201, 205, 208, 237, 238, 239, 241. CMU: Self-priming over filled CMU
Wall board, Wood & Drywall: Self-priming or Series 201

Number of Components

Two: Part A and Part B (1 Part A to 1 Part B by volume)

Intermediate

Series 210, 237, 237SC, 238, 239, 239SC, 270, 273, 282

Theoretical Coverage

1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †

Surfacer/Filler/Patcher

Series 130, 215, 218, 1254. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.

Finish

Gloss. (Roller application provides an orange peel finish.)

Volume Solids

100% (mixed) †

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close