South Water Purification Plant

Known in the Chicago area for its “green” initiatives, the South Water Purification Plant achieved Leadership in Energy and Environmental Design (LEED) NC Version 2.2 certification for a facility built with environmentally friendly materials, including protective coating systems from Tnemec. “The project involved a new water purification plant chlorine building, which provides reliably disinfected water to millions of people,” according to Tnemec coating consultant Erik Otten. “Tnemec was able to submit coatings to assist in obtaining LEED EQ 4.2 credit related to low-emitting materials such as paints and coatings.”

The building’s interior concrete and masonry was prepared in accordance with SSPC SP-13/NACE No. 6 Surface Preparation of Concrete, followed by two coats of Series L69 Hi-Build Epoxoline II, a polyamidoamine epoxy, which has less than 100 grams per liter of volatile organic compounds (VOCs). The primer and intermediate coats were spray- and back-roll-applied. The finish coat was Series 297 Enviro-Glaze, a ceramic-modified, low-VOC, aliphatic polyurethane, which was spray-applied. More than 2,000 gallons of Series L69 and 500 gallons of Series 297 were used to protect the concrete and masonry against chemical fumes.

Two coats of Series L69 were also brush- and roller-applied to exterior ductile iron pipe, which was prepared in accordance with the National Association of Pipe Fabricators (NAPF) 500-03 Surface Preparation Standard for Ductile Iron Pipe and Fittings Receiving Special External Coatings and/or Special Internal Linings. Nearly 85 gallons of Series L69 were used on the pipes to protect them against possible sweating and chemical fumes. Series 6 Tneme-Cryl, an acrylic emulsion, was roller-applied to exterior pipe for protection against ultraviolet (UV) light.

Concrete for secondary containment was prepared in accordance with SSPC SP-13/NACE No. 6, primed with Series 201 Epoxoprime, a high-solids modified polyamine epoxy, followed by two coats of Series 282 Tneme-Glaze, a highly chemical-resistant polyamine novolac epoxy.

Exterior cast stone was treated with a spray-applied coat of Series 636 Dur-A-Pel 20, a silane/siloxane blend, to protect against rain, freeze/thaw spalling and stain damage.

The South Water Purification Plant is one of two water purification plants that serve nearly 5 million people in the City of Chicago and 118 suburbs. When it was placed in operation in 1947, a large part of the treatment plant was constructed with a “green roof” that covered more than 10 acres. In 2010, the newly constructed facility housing water disinfection equipment was awarded “LEED Certified” status by the U.S. Green Building Council. The project was also a finalist in the ACEC 2010 Engineering Excellence Award, Water and Wastewater.

    Project Information

    Location
    Chicago, IL

    Completion
    April 2010

    Owner
    City of Chicago Department of Water

    Engineer
    Greeley & Hansen Chicago, IL

    Field Applicator
    Nikolas Painting Bridgeview, IL

    Printer Friendly Version

    PP_South_Water_Plant_Profile

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    Sustainable Building

    Need Coatings for LEED Projects?

    Tnemec offers a long list of low VOC coatings built to protect sustainable structures.

    How to Purchase

    Ready to Order Tnemec?

    We're ready to help. Click below to learn more about our purchasing process.

    Continue Exploring in the color tool

    Close

    Color Swatch packet

    When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool

    Close