Oneota Street Pump Station

During replacement of the last pumping station built by Duluth, Minnesota, in the 1920s, the Western Lake Superior Sanitary District (WLSSD) was able to rehabilitate the deteriorated concrete in an aging lift station using a high-build, fiber-reinforced epoxy liner from Tnemec. “The concrete in the lift station had corroded down to the river rock that was used as aggregate during mixing,” Tnemec coating consultant Randy Bartz observed. “The level of deterioration was indicative of wastewater facilities around the country that are looking for ways of maintaining or restoring infrastructure that was constructed many years ago.”

Prior to coating, the concrete was power washed and prepared in accordance with SSPC-SP13/NACE No. 6, ICRI-CSP5 Surface Preparation of Concrete. Next, the concrete was resurfaced with Series 218 MortarClad, an epoxy-modified cementitious mortar, which was trowel-applied at ¼-inch. “The concrete was especially corroded in the scum layer where there was as much as ½-inch of deterioration,” Bartz noted. “That’s where the coating contractor used a mason’s brush to scrub the mortar around the exposed aggregate.”

A topcoat of Series 436 Perma-Shield FR, a fiber-reinforced, 100 percent solids, modified polyamine epoxy liner, was spray-applied at 60 to 80 mils DFT. This high-build liner provides exceptional rehabilitative concrete corrosion protection from H2S gas permeation and biogenic sulfide corrosion found in severe wastewater systems. The fiber reinforcement in Series 436 offers flexural and tensile strength, making it ideal to use in domestic wastewater systems where high abrasion and impact resistance are needed.

The restoration project was completed during winter months when the wastewater flow could be diverted from the lift station. “Ideally, we would like temperatures in the 50 degree range when we’re applying these coatings,” Bartz confirmed. “Given our winter weather in northern Minnesota, they had to pump indirect heat to the lift station to achieve proper cure.”

According to Bartz, municipal wastewater containment structures are being used well beyond their 40 to 50 year design life. “Many municipalities are looking for ways to maintain the infrastructure that they have while adding even more capacity,” Bartz added. “They’re also concerned with containing odor, which contributes to an even more aggressive wastewater environment for coating systems that are used to protect concrete and steel from corrosion.”

The Oneota Street pump station in western Duluth was the last remaining part of the city’s original wastewater system. The facility was acquired in 1978 by the WLSSD, which was created by the Minnesota Legislature seven years earlier to improve and protect the waters of the St. Louis River and its tributaries.

    Project Information

    Location
    Duluth, MN

    Completion
    November 2007

    Owner
    Western Lake Superior Sanitary District

    Engineer/Architect
    MSA Professional Service, Duluth, MN

    Field Applicator
    Northland Painting of Duluth, Duluth, MN

    Printer Friendly Version

    PP_ONeota_ST_Pump_Station

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    Sustainable Building

    Need Coatings for LEED Projects?

    Tnemec offers a long list of low VOC coatings built to protect sustainable structures.

    How to Purchase

    Ready to Order Tnemec?

    We're ready to help. Click below to learn more about our purchasing process.

    Continue Exploring in the color tool

    Close

    Color Swatch packet

    When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool

    Close