Bryant-Denny Stadium

The University of Alabama’s Bryant-Denny Stadium is nationally known as an intimidating place for visiting football teams to play. Since the stadium’s completion in 1929, the university’s football team has developed a phenomenal winning tradition resulting in as loyal a fan base as can be found in college sports.

This popularity brought with it a huge demand for extra capacity, so the university broke ground in 2006 on additional enhancements that included more skyboxes and a north end-zone addition that would add over 8,000 new seats, bringing total capacity to 92,138.

The old seats’ factory finish had weathered nearly 20 years of intense sun, leaving the once bright red faded and chalked. Tnemec’s Series 1070 Fluoronar, an advanced fluoropolymer topcoat, was selected for its exceptional color and gloss retention. Able to withstand ultra-violet light that can damage other coatings and cause them to fade, Fluoronar retains its color and gloss for many years and easily outperforms even the best polyurethanes.

The section of approximately 2,000 seat frames was first power tool cleaned in accordance with SSPC-SP3 and then primed with a spray-applied coat of Series 135 Chembuild, a modified polyamidoamine epoxy with exceptional adhesion characteristics, followed by a coat of Series 1070 Fluoronar in Crimson Tide Red. The need for a color-fast coating didn’t stop in the stands. The observation towers at the team’s practice field – and even the blocking sleds – received the same system.

The renovation project also addressed the concourses in the lower bowl where a Tnemec flooring system was applied to a 70,000 sq ft area. Series 237 PowerTread, a multi-purpose polyamine epoxy, was applied by double broadcast to a thickness of 1/8”. This impact and abrasion resistant floor topping was then coated with Series 280 Tneme-Glaze, a durable polyamine epoxy that seals and smoothes the surface. A coat of Series 291 CRU, a polyester polyurethane, was then applied for increased resistance to abrasion and staining.

With a newly refurbished stadium and a fresh coat of paint, Bryant-Denny Stadium will surely continue the colorful tradition of Alabama football.

    Project Information

    Location
    Tuscaloosa, Alabama

    Completion
    September 2006

    Owner
    University of Alabama

    Engineer
    University of Alabama

    Contractor and Applicator
    Southeastern Industrial Construction (seats) and The Vulcan Group (floors)

    Printer Friendly Version

    PP_Bryant_Denny_Stadium_Profile

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    How to Purchase

    Ready to Order Tnemec?

    We're ready to help. Click below to learn more about our purchasing process.

    Color Requests

    Searching for the Right Color?

    Use our color tool or request more tools from your local representative.

    Continue Exploring in the color tool

    Close

    Color Swatch packet

    When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool

    Close