- Home
- Products
-
DOWNLOAD DATA SHEET
Series 20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
Industry standard for potable water epoxy coatings for nearly 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for its benchmark performance.
-
DOWNLOAD DATA SHEET
Series FC20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
Fast-curing protective coating for use in steel and concrete potable water storage facilities. Contact your Tnemec representative for other systems and additional information on potential uses.
-
DOWNLOAD DATA SHEET
Series 27 | F.C. Typoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For Steel, Other
- Generic Description Polyamide Epoxy
Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.
-
DOWNLOAD DATA SHEET
Series 27WB | Typoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Inorganic Hybrid Water-Based Epoxy
A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid handling properties. Series 27WB exhibits low yellowing and good color stability in whites and light tone colors. Formula protected under U.S. patent.
-
DOWNLOAD DATA SHEET
Series 48 | Multi-Purpose Epoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For Steel, Masonry & Stucco, Concrete
- Generic Description Polyamide Epoxy
A multi-purpose epoxy coating with fast-cure and low temperature application properties. An excellent choice for shop and field application when rapid curing for fast turn-around is needed. Can be applied to a variety of substrates including steel, concrete, and CMU, as well as previously painted surfaces. Accepts a range of primers and topcoats for complete system selection.
-
DOWNLOAD DATA SHEET
Series 73 | Endura-Shield
- Uses Intermediate Coats, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
A coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.