Series N285
Satinglaze
Generic Type
Modified Polyamine Epoxy
Common Usage
A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake-filled flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
Coves and Vertical Surfaces: Series N285 can be used to build grout and seal vertical surfaces such as 4” base and wainscot.
Special Qualifications
Series N285 meets the requirements of LEED-Low-Emitting Materials, Collaborative for High-Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volume Solids
100% (mixed)
Volatile Organic Compounds
Unthinned: 0.17 lbs/gallon (20 grams/litre)
Curing Time
| Temperature | To Recoat | To Place in Service |
|---|---|---|
| 75°F (24°C) | 12-72 hours | 24 hours |
Note: This product is not normally topcoated, but should there be a reason and more than 72 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
Theoretical Coverage
1,604 mil sq ft/gal (36.2 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components
Two: Part A and Part B
Recommended DFT
4.0 to 6.0 mils (100 to 150 microns) per coat.
Intermediate
Series N284. Note: Series N222, N223, N224, should be coated with N285 only after a grout coat of N284 has been applied.
Finish
Gloss - Orange Peel
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep