Series 294
Clear CRU
This product has been discontinued. Please contact your local sales representative for further assistance.
Generic Type
Aliphatic Polyester Polyurethane
Common Usage
Durable, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Typically used over epoxy and urethane flooring systems for increased abrasion and chemical resistance and a low-sheen appearance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
Colors
Clear
Finish
Low semi-gloss
Intermediate
Series 205, 210, 222, 223, 224, 237, 238, 280, 281, 284, 285, 287, 290 and 291. Note: Scarification using a power sander and 100 grit sandpaper, No. 60 mesh sanding screen or a coarse stripping pad is required if topcoating Series 294 with itself. Note: When applying Series 294 over a broadcast or mortar system, an epoxy grout coat is required. Note: Because epoxies will chalk and discolor when exposed to ultraviolet light, exterior exposures require a pigmented urethane over epoxy coatings before the Series 294 may be applied.
Curing Time
| Temperature | Min. Recoat | To Service | Chemical Resistance |
|---|---|---|---|
| 75°F (24°C) | 12 hours | 24 hours | 7 days |
Curing time varies with surface temperature, air movement, humidity and film thickness.
HAPS
Unthinned: 0.44 lbs/gal solids
Thinned 20% (No. 39 Thinner): 0.42 lbs/gal solids
Number of Components
Two: Part A and Part B (2.5 Parts A to 1 Part B by volume)
Theoretical Coverage
1,059 mil sq ft/gal (26.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volume Solids
66 ± 2.0% (mixed)
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat.
Volatile Organic Compounds
Unthinned: 2.36 lbs/gallon (282 grams/litre)
Thinned 20% (No. 39 Thinner): 3.02 lbs/gallon (362 grams/litre)