Series 215 | Surfacing Epoxy

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.

Series 215ML | Mat-Reinforced Epoxy Lining

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy

Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.

Series 211-215 & 216 | Fiberglass Mat

• Generic Description 3/4 oz Chopped Strand Mat

Provides fiberglass mat reinforcement to epoxy & vinyl ester lining systems. Increases impact, thermal shock and abrasion resistance for greater durability.

Cedar Creek Water Treatment Plant

• Industries Architectural

Series 215 Surfacing Epoxy was applied as a full skim coat to smooth out the entire wall and fill surface imperfections in the existing concrete troughs at the Cedar Creek Water Treatment Plant in Win

Samsung Fab A2

• Industries Architectural

Series 215 Surfacing Epoxy was used to fill and surface over 500,000 square feet of concrete waffle slab at the new Samsung facility in Austin, TX.

Pine County Jail

• Industries Industrial

After experiencing difficulties filling mortar joints with an epoxy mortar, contractors applied Series 215 Surfacing Epoxy to achieve a smooth surface in the shower stalls at the Pine County Jail in M

Application Guides

Explore the comprehensive world of coating solutions with Tnemec's Application Guides. Uncover expert insights, best practices, and tailored recommendations for a wide range of surfaces and environments by product.

Series 273 | Stranlok ML

• Uses Intermediate Coats
• For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
• Generic Description Modified Polyamine Epoxy

A fiberglass mat reinforced coatings system for walls and ceilings providing cleanability and protection against chemical and physical abuse. Provides a high-performance, smooth, seamless surface with excellent chemical, stain, impact and abrasion resistance.

Series 322 | Tank Armor

• Uses Linings & Secondary Containment
• For Steel
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, solvent-free, high build epoxy lining for the interior of steel storage tanks and vessels from various cargos including non-potable water, crude oil, diesel fuel and other refine petroleum products. Also used to line concrete basins, troughs, and tanks where a coating resistant to chemicals, fuels, and domestic wastewater immersion service is needed. Note: Series 322-1241 can be used with mat to create a reinforced laminate system excellent for use over heavily pitted internal tank bottoms. Contact Tnemec Technical for additional information.

Series 217 | MortarCrete

• Uses Surfacer, Filler, Patcher
• For Concrete
• Generic Description Calcium Sulfoaluminate Cementitious Repair Mortar and Concrete

A single-component, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces or extended with aggregate to make high-strength concrete.