Martec Pharmaceutical, Inc.

Martec, the only U.S. subsidiary of one of the largest pharmaceutical manufacturers in the world, Merckle GmbH, Ulm, Germany, built a 9,000-squarefoot plant in the late 1980s. In 2003, Plant Manager Mary Stahl was worried that the old Glidwall System protecting the plant’s walls had completely failed. She called on Tom Dunn with KC Heritage, the plant’s long-time general contractor. Understanding the coatings challenge— walls and floors are regularly scrubbed with a 50-50 solution of Clorox and water heated to 220 degrees Fahrenheit — Dunn searched for a system that would withstand this abusive environment.

Dunn called Ron Goens with painting contractor Goens Brothers Painting, Inc., who then contacted Tnemec coating consultant Darrell Buerky, and the three men met at Martec in January 2004 to inspect the plant’s floor and wall surfaces. The decision was made to go with Tnemec’s StrataShield floor and wall coatings product line. “We applied the original Glidwall System,” Goens explained. “You glue it to the wall like wallpaper in 54-inch sections, then coat over it. It takes forever to apply. In contrast, the StrataShield system is much less labor intensive, requires little maintenance and has a much longer life expectancy.”

Goens explained that his crew roller-applied Series 201 Epoxoprime, the polyamine epoxy primer, to the lab walls. They then spray-applied the fiberglass reinforced Series 270 Stranlok, which has a curing time of only six hours. The walls were then sanded and sealed with Series 475 Triton, a waterborne acrylic polyurethane. Once the walls were finished, Epoxy Coating Specialists, Inc. crews then coated the lab floors with Series 237 Power-Tread, an aggregate-filled modified polyamine epoxy. Finally, all the floors were topcoated with Series 280 Tneme-Glaze.

“This Stranlok product is as tough as nails,” Goens said. “It has no competitor. And once it has cured, you can take a hammer to the drywall and punch a hole through the wall and the Stranlok will remain fast and untouched. This same toughness applies to the flooring protection. Tnemec is a first class company and makes the finest high performance coatings in the world. Ask any architect.”

    Project Information

    Location
    Kansas City, Missouri

    Completion
    October 2004

    Owner
    Merckle GmbH Ulm, Germany

    General Contractor
    KC Heritage, Kansas City, MO

    Painting Contractor-Walls
    Goens Brothers Painting, Inc. Gladstone, Missouri, Epoxy Coating Specialists, Inc. Kansas City

    Painting Contractor-Floors
    Epoxy Coating Specialists, Inc., Kansas City, KS

    Printer Friendly Version

    Martec Pharmaceutical, Inc.

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    How to Purchase

    Ready to Order Tnemec?

    We're ready to help. Click below to learn more about our purchasing process.

    Color Requests

    Searching for the Right Color?

    Use our color tool or request more tools from your local representative.

    Continue Exploring in the color tool

    Close

    Color Swatch packet

    When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool

    Close