Clarkson WWTP Digester

Located in the Region of Peel, the Clarkson Wastewater Treatment Facility serves the municipalities of Mississauga, Brampton and Caledon in Ontario, Canada. In 1999, Clarkson underwent a facility-wide expansion to include two new digester tanks and a sludge blending tank, an aeration tank and final tank, a biosolids complex, a new headworks facility and a plant storage facility.

Among other areas of new construction within the Clarkson facility, Tnemec coating systems were specified for the interior and exterior steel of the digester lid. The exterior surface was first prepared in accordance with SSPC-SP10/NACE No. 2 Near-White Metal Blast Cleaning. Next, two coats of Series FC20 PotaPox FC, a high-performance polyamide epoxy coating known for its forgiving application characteristics and benchmark performance, were brush- and roller-applied, followed by a topcoat of Series 1075 Endura-Shield II, an aliphatic acrylic polyurethane highly resistant to abrasion, wet conditions, corrosive fumes and weathering.

Specified for the interior of the steel digester lid were Series 1 Omnithane and Series 406 Elasto-Shield. Series 1 is a single component, moisture-cured, MIOzinc urethane primer that offers an extremely fast recoat time. “Series 1 is unlike a lot of primers,” noted Tnemec coating consultant David Walker. “Not only does it offer a fast recoat window, but it also stays open to subsequent topcoats, unlike traditional primer technologies. Most primers allow 24 to 72 hours before the area must be topcoated, and if not, the area will have to be prepared again, which is costly. Series 1, however, allows for extended periods between primer and topcoat application.”

The interior steel was prepared in accordance with SSPC-SP5/NACE 1 White Metal Blast Cleaning, then received a spray-applied coat of Omnithane. Series 406 Elasto-Shield, a fast-curing polyurethane, was then spray-applied at a minimum of 100.0 mils DFT with heated plural component equipment to finish the interior. A two-component, monolithic coating designed to provide a durable lining in a single coat application, Series 406 has excellent chemical, thermal shock and abrasion resistance and is ideal for application to steel or concrete in water and wastewater treatment facilities.

    Project Information

    Mississauga, Ontario, Canada

    December 2005

    Region of Peel

    Earth Tech (Canada) Inc. Markham, Ontario

    GL&V / Dorr-Oliver Canada Inc Orillia, Ontario

    Algoma Contractors, Inc. Stoney Creek, Ontario

    Printer Friendly Version


    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    How to Purchase

    Ready to Order Tnemec?

    We're ready to help. Click below to learn more about our purchasing process.

    Sustainable Building

    Need Coatings for LEED Projects?

    Tnemec offers a long list of low VOC coatings built to protect sustainable structures.

    Continue Exploring in the color tool


    Color Swatch packet

    When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool