- Home
- Products
-
DOWNLOAD DATA SHEET
Series 210 | Even-Flow SL
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aggregate-Filled Modified Polyamine Epoxy
- Finish Gloss
A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.
-
DOWNLOAD DATA SHEET
Series 215 | Surfacing Epoxy
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 215ML | Mat-Reinforced Epoxy Lining
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Modified Polyamine Epoxy
Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.
-
DOWNLOAD DATA SHEET
Series 217 | MortarCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Calcium Sulfoaluminate Cementitious Repair Mortar and Concrete
A single-component, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces or extended with aggregate to make high-strength concrete.
-
DOWNLOAD DATA SHEET
Series 218 | MortarClad
- Uses Surfacer, Filler, Patcher
- For Masonry & Stucco, Concrete
- Generic Description Epoxy Modified Cementitious Mortar
A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 265 | Elasto-Shield TG
- Uses Surfacer, Filler, Patcher
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
A trowel-grade compound for use with Elasto-Shield products. Used to fill and repair cracks, bugholes, spalled or otherwise damaged concrete, masonry and asphalt. Also used for sealing the edges of faying surfaces, sealing seams, filling pits and encapsulating rivet and bolt heads on the interior of steel tanks.
-
DOWNLOAD DATA SHEET
Series 351 | Tank Armor
- Uses Surfacer, Filler, Patcher
- For Steel
- Generic Description Polysulfide Epoxy Novolac Polymer
- Finish Semi-gloss
A 100% solids flexible polymer formulated for general use as a trowel grade filler/surfacer for steel and provides protection against chemical attack and environmental degradation. Resistant to a wide range of petroleum products, fuels, gasohol, waste, alkalis, and organic and inorganic acids. Compatible with a variety of topcoats. Note: Contact your Tnemec representative or Tnemec Technical Service with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 469 | LavaCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Epoxy Polymer Concrete
- Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.
Series 469 LavaCrete is a non-shrinking epoxy polymer concrete used for the rehabilitation of severely eroded concrete or for the corrosion proofing of new concrete where chemical resistance is required throughout the complete topping system. Extremely fast setting, allowing for rebuilds of process floors and secondary containment structures. Also used to cast sumps, drains and trenches and is an outstanding grouting material for vibration dampening in base plates and on motor pads. Series 469 kits are packaged for casting and standard placement of material. A grouting mix may be made by adjusting the kit for a more fluid application. Series 469 resin may also be used in broadcast, trowel and mat reinforced systems with a multitude of ancillary materials for services in chemical processing, wastewater, paper, power and other demanding industries.
-
DOWNLOAD DATA SHEET
Series 479 | LavaCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Epoxy Novolac Polymer Concrete
- Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.
Series 479 is a non-shrinking novolac epoxy polymer concrete ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. Extremely fast setting, allowing for rebuilds of sumps, pump pads, trenches, process floors and secondary containment structures. Series 479 kits are packaged for casting and standard placement of material. A grouting mix may be made by adjusting the kit for a more fluid application. Series 479 resin may also be used in broadcast, trowel and mat reinforced systems with a multitude of ancillary materials for services in chemical processing, wastewater, paper, power and other demanding industries.
-
DOWNLOAD DATA SHEET
Series 489 | LavaCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Epoxy Vinyl Ester Polymer Concrete
- Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.
Series 489 is a durable polymer concrete which exhibits fast curing and minimal shrinkage. Ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. Series 489 is ideal for pump and pad rebuilds in areas of strong acid and caustic exposure. Use to cast sumps and trenches off-site for time and labor savings.