Series 120-5001
Vinester
Generic Type
Novolac Vinyl Ester
Common Usage
A finish coat designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels. Provides splash, spillage and fume protection for structural surfaces and secondary containment. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
View more product detailsProduct Data Sheets
- English_Series_120_5001_Vinester_pds.pdf
- French_Series_120_5001_Vinester_pds.pdf
- Spanish_Series_120_5001_Vinester_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 5001 Gray Topcoat
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Prepared Bare Concrete and Steel: Series 120-5002
Surfacer/Filler/Patcher
Series 215, 218. Note: Prime coat of 120-5002 is required over surfacer/filler/patcher prior to application of 120-5001.
Number of Components
Two: Part A (base) and Part B (catalyst)
Volatile Organic Compounds
Unthinned: 0.64 lbs/gallon (77 grams/litre)
Thinned 3%: 0.83 lbs/gallon (99 grams/litre)
Finish
Semi-gloss
Volume Solids
Theoretical 89% (mixed). Series 120 Vinester system contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement. See Practical Coverage Rates.
Curing Time
| Temperature | To Handle | To Recoat | Immersion |
|---|---|---|---|
| 75°F (24°C) | 4 hours | 6 hours min 2 hours max. | 72 hours min. |
Note: Scarification required if maximum recoat time is exceeded.
Curing time varies with surface temperature, air movement, humidity and film thickness.
Intermediate
Series 237SC, 239SC, 252SC, 270
Recommended DFT
12.0 to 18.0 mils (305 to 455 microns) per coat (minimum of one coat 5002 primer and one coat 5001 finish coat).
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep