- Home
- Products
-
DOWNLOAD DATA SHEET
Series 120-5001 | Vinester
- Uses Top and Finish Coats
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A finish coat designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels. Provides splash, spillage and fume protection for structural surfaces and secondary containment. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 120-5002 | Vinester
- Uses Primer and/or Block Fillers
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A primer designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels. Provides splash, spillage and fume protection for structural surfaces and secondary containment. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 251SC | ChemBloc
- Uses Primer and/or Block Fillers, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 252SC | ChemBloc
- Uses Linings & Secondary Containment, Top and Finish Coats
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 489 | LavaCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Epoxy Vinyl Ester Polymer Concrete
- Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.
Series 489 is a durable polymer concrete which exhibits fast curing and minimal shrinkage. Ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. Series 489 is ideal for pump and pad rebuilds in areas of strong acid and caustic exposure. Use to cast sumps and trenches off-site for time and labor savings.
-
DOWNLOAD DATA SHEET
Series 490 | LavaCrete
- For Concrete
- Generic Description Novolac Vinyl Ester Polymer Concrete
- Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.
Series 490 is a durable polymer concrete which exhibits fast curing and minimal shrinkage. Ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. Series 490 has enhanced solvent and temperature resistance over standard vinyl ester materials. Series 490 is ideal for pump and pad rebuilds in areas of strong acid and caustic exposure. Use to cast sumps and trenches off-site for time and labor savings.
-
DOWNLOAD DATA SHEET
Series 1402 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Vinyl Ester
- Finish Gloss
Series 1402 is a food grade, vinyl ester primer for complete FDA-compliant lining systems in concrete, steel or stainless-steel tanks. Fast-cure characteristics allow for quick application of subsequent coats, limiting downtime and facility disruption. Series 1402 is the only approved primer for the ProPolymer food grade product line. Replaces ProPolymer 4808.
-
DOWNLOAD DATA SHEET
Series 1407 | Vinester
- Uses Primer and/or Block Fillers
- For Steel, Concrete
- Generic Description Flexible Vinyl Ester
- Finish Gloss
Series 1407 is a specially formulated primer with flexible properties designed for use on concrete and steel substrates. Series 1407 may be used under a wide-range of Tnemec vinyl ester intermediate and finish coats with the exception of direct food contact systems. Replaces ProPolymer 4805.
-
DOWNLOAD DATA SHEET
Series 1415 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Semi-gloss
This corrosion resistant resin is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. A versatile selection for many secondary containments and process floors, Series 1415 is best for caustic and high-ph applications, and when used as the base material for silica-free systems. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1415 was formerly ProPolymer 4860.
-
DOWNLOAD DATA SHEET
Series 1416 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
This extremely corrosion resistant coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. Series 1416 is the best selection for strong acid conditions and when temperatures above ambient conditions are expected. Use this product to add specialty mortar powders, to embed glass mats, as a saturant coat, or as a pigmented self-leveling finish coat. Combine with LavaCrete Part C aggregate to create an enhanced corrosion resistant polymer concrete. Series 1416 was formerly ProPolymer 4847.
-
DOWNLOAD DATA SHEET
Series 1418 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description High Temperature Novolac Vinyl Ester
- Finish Semi-gloss
Resistant to very high temperature service and extremely corrosive environments, this coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as "neat" or non-pigmented. Series 1418 is the recommended selection for use in the most chemically demanding environments, such as, wet or dry FGD scrubbers, ductwork and slurry tanks operating in elevated temperature conditions. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1418 was formally ProPolymer 4847HT.
-
DOWNLOAD DATA SHEET
Series 1420 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Matte
Series 1420 is an FDA-compliant, trowel-grade vinyl ester lining suitable for direct-food contact in tanks and vessels. Glass-flake reinforcement provides additional abrasion and permeation resistance in wet slurry or immersion service environments. Series 1420 may be used as a stand-alone lining system or with a gel coat in a multi-coat system. Replaces ProPolymer 4855T.
-
DOWNLOAD DATA SHEET
Series 1422 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1422 is an FDA-compliant, trowel-grade, high temperature lining suitable for tanks and vessels in food grade service environments or where high temperature conditions are required. Highly filled with glass-flake, it is specially formulated for exceptional service in thermal cycling and chemical reaction vessels. Replaces ProPolymer 4865T.
-
DOWNLOAD DATA SHEET
Series 1428 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
An enhanced elevated temperature, novolac vinyl ester, filled with specially treated premium glass flakes. This product has outstanding trowel application properties. Series 1428 is ideal for the rehabilitation of heavily corroded steel substrates and for high film build protection in the most demanding chemically active and corrosive environments. Series 1428 can be used in FGD units for time saving, quick repairs on small areas or used as a complete lining. Formerly ProPolymer 4875T.
-
DOWNLOAD DATA SHEET
Series 1430 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1430 is an FDA-compliant, mineral flake-filled vinyl ester lining for food grade tanks, vessels and other structures. Applied by spray or roller, it can be used as either a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4813S.
-
DOWNLOAD DATA SHEET
Series 1432 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1432 is an FDA-compliant, vinyl ester lining for food grade tanks, vessels and other structures. Highly filled with glass flake, Series 1432 is specially formulated to provide exceptional service in thermal cycling and chemical reaction tanks and vessels. Applied by roller or spray, it may be used as a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4822S.
-
DOWNLOAD DATA SHEET
Series 1436 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Epoxy Novolac Vinyl Ester
- Finish Semi-gloss
A high molecular weight (HMW), elevated temperature-service, glass-flake-filled novolac vinyl ester lining. Can be used as a gel coat, as a stand-alone liner or as part of a full vinyl ester system. Commonly used in high temperature filtration units, bag houses, exhaust and duct work, and as a primary lining for wet chemical services. Formerly ProPolymer 4834S.
-
DOWNLOAD DATA SHEET
Series 1438 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A high-build, novolac vinyl ester, glass-flake filled lining with an enhanced elevated temperature resistance in dry and wet corrosive environments. Series 1438 is ideal for use in flue gas desulfurization (FGD) units, hot duct work, and wet and dry absorbers. Also an outstanding primary lining for many challenging chemical immersion services. Formerly ProPolymer 4844S.
-
DOWNLOAD DATA SHEET
Series 1439 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Abrasion Resistant Novolac Vinyl Ester
- Finish Semi-gloss
An elevated temperature service, high-build novolac vinyl ester, with a proprietary blend of abrasion resistant powders and ceramics. Series 1439 is ideal for use in high wear, high air velocity with heavy particulate suspension and on impingement areas. Series 1439 is an outstanding selection for use in abrasive slurry lining services. Formerly ProPolymer 4844SAR.