Series 396
Tank Armor
Generic Type
Ultra High-Build Reinforced Novolac Epoxy
Common Usage
A thick-film reinforced epoxy internal lining formulated for corrosion control and abrasion resistance in milling and process environments, chemical plants and refineries. Allows for ultra high-build application of 125 mils DFT. Series 396 exhibits superior corrosion and abrasion resistance for pipelines and process and storage tanks.
View more product detailsProduct Data Sheets
- English_Series_396_Tank_Armor_pds.pdf
- French_Series_396_Tank_Armor_pds.pdf
- Spanish_Series_396_Tank_Armor_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
- 1232 Tank Armor Blue
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Primers
Self-priming
Surfacer/Filler/Patcher
Series 351
HAPS
0.11 lbs/gal solids
Number of Components
Two: Two Part A (epoxy) to One: Part B (amine)
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Volume Solids
100%
Recommended DFT
40.0 to 125.0 mils (1,016 to 3,175 microns) one coat with multiple passes.
Volatile Organic Compounds
0.23 lbs/gallon (27 grams/litre)
Curing Time
| Temperature | To Touch | To Handle | Immersion |
|---|---|---|---|
| 75°F (24°C) | 2 hours | 4 hours | 8 to 10 hours |
These times are based on a 40 mil (1,016 micron) dry film thickness. Higher film thicknesses, insufficient ventilation or cooler temperatures will require longer cure times. This coating commonly develops an amine-blush during cure. While this condition will not adversely affect performance of the coating, this blush must be removed by aggressive sweep blasting before applying additional coats. During high humidity conditions, it is recommended that the application be done while the temperatures are increasing. Cure time to achieve a minimum Shore D Hardness of 80 or Barcol GYZJ 935 hardness of 65 for immersion service is 8 to 10 hours. In order to obtain an accurate reading, the minimum DFT must be 30 mils.
Finish
Semi-gloss
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep