Series 365
Tank Armor
Generic Type
Novolac Epoxy
Common Usage
Spray applied, 100% solids, high build, reinforced epoxy formulated for general use as an internal lining for tanks and other aggressive chemical immersion service. Exhibits excellent range of chemical and solvent resistance combined with physical properties for long term durability and service life. Contact Tnemec for more information.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volatile Organic Compounds
0.09 lbs/gallon (11 grams/litre)
Curing Time
| Temperature | To Touch | To Handle | To Recoat | Immersion |
|---|---|---|---|---|
| 75°F (24°C) | 2 hours | 3 hours | 15 to 30 minutes | 24 to 48 hours |
Curing time will vary with surface temperature, air movement, humidity, and film thickness. These times are based on a 20.0 mil (510 microns) dry film thickness. Higher film thicknesses, insufficient ventilation, or cooler temperatures will require longer cure times. Note: This coating commonly develops an amine-blush during cure. While this condition will not adversely affect the performance of the coating, this blush must be removed prior to recoating. Wipe the surface clean with a solution of 70% isopropyl alcohol (IPA) and 30% water, followed by an aggressive sweep blast to remove the gloss. Contact Tnemec Technical Services for more information. During high humidity conditions, it is recommended that the application be done while the temperatures are increasing. Cure time to achieve a minimum Shore D Hardness of 81 or Barcol GYZJ 935 hardness of 65 for immersion service is 24 to 48 hours. In order to obtain an accurate reading, the minimum DFT must be 30 mils (760 microns).
Volume Solids
100% (nominal)
HAPS
0.06 lbs/gal solids
Number of Components
Two Part A (epoxy) and Part B (amine)
Finish
Semi-gloss
Surfacer/Filler/Patcher
Series 351
Primers
Self-priming
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Recommended DFT
20.0 to 60.0 mils (510 to 1,525 microns) one coat with multiple passes.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep