Series 252SC
ChemBloc
Generic Type
Novolac Vinyl Ester
Common Usage
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
View more product detailsProduct Data Sheets
- English_Series_252Sc_Chembloc_pds.pdf
- French_Series_252Sc_Chembloc_pds.pdf
- Spanish_Series_252Sc_Chembloc_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volatile Organic Compounds
Unthinned: 0.2 lbs/gallon (23 grams/litre)
Base Coats
Series 252SC. (For a flexible basecoat option, refer to Series 206SC product data sheet.)
Primers
Series 251SC. Series 208, 241 (for horizontal applications only).
Number of Components
Resin Containment Kit (RCK)–Two: Part A (base) and Part B (catalyst)
Mortar Containment Kit (MCK)–Three: Parts A (base), B (catalyst), and C (aggregate)
Volume Solids
Theoretical 89% (mixed). Series 252SC system contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement. See Coverage Rates.
Surfacer/Filler/Patcher
Series 215, 217, 252SC ChemBloc (MCK) mortar. Note: The following products can be used as a surfacer, filler, or patcher by mixing with 211-9111 Bulking Additive: Series 120-5002, 251SC, 1402, 1407, 1415, 1416, and 1418. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs (reference Technical Bulletin 99-22). For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Recommended DFT
Resinous Basecoat: 6.0 to 12.0 mils (150-305 microns)
Mortar/Slurry Basecoat: 60 to 80 mils (1525 to 2030 microns)
Saturant: 8.0 to 24.0 mils (200-610 microns)
Topcoat: 4.0 to 12.0 mils (100-305 microns)
Topcoats
Series 252SC. Note: A saturant coat of 252SC liquids is required over fiberglass mat prior to application of topcoat. However, when Series 206SC flexible basecoat is used, then a 237SC or 239SC saturant coat is required.
Curing Time
| Temperature | To Topcoat | Place in Service | Full Cure |
|---|---|---|---|
| 75°F (24°C) | 6 to 72 hours | 24 hours | 72 hours |
If more than 72 hours have elapsed between coats, the ChemBloc coated surface must be mechanically abraded before topcoating. Note: A 24 hour cure provides for traffic, secondary containment and certain mild chemical exposures. Contact your Tnemec representative or Tnemec Technical Services.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep