Series 1422
ProPolymer
Generic Type
Elevated Temperature Epoxy Vinyl Ester
Common Usage
Series 1422 is an FDA-compliant, trowel-grade, high temperature lining suitable for tanks and vessels in food grade service environments or where high temperature conditions are required. Highly filled with glass-flake, it is specially formulated for exceptional service in thermal cycling and chemical reaction vessels. Replaces ProPolymer 4865T.
Special Qualifications
Complies with the requirements and extractive limitations of US FDA 21 CFR Part 175.300 Resinous and Polymeric Coatings for tanks or other repeated use direct food storage or mixing vessels 5 gallons or greater under conditions of use
C-E with all food types. Compliance was based upon raw material supplier documents, and third party analytical and extractive test results (HKGH02404141).
Contact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Number of Components
Two: Part A (base) and Part B (catalyst)
Recommended DFT
30.0 to 60.0 mils (760 to 1525 microns) per coat.
Volume Solids
85.0 ± 2.0% (mixed). Series 1422 contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement.
Curing Time
| Temperature | To Recoat | Immersion | Maximum Recoat |
|---|---|---|---|
| 90°F (32°C) | 3 hours | 24 hours | 3 days |
| 75°F (24°C) | 4 hours | 48 hours | 5 days |
| 60°F (16°C) | 12 hours | 4 days | 7 days |
Recoat times are typical for coating to be dry-to-touch and ready for the next application. Immersion and certain other services may require longer cure times and/or elevated temperature post cure for optimal performance. Direct food contact service requires post cure; see Application Guide. ASTM D2583 Barcol Hardness check is also recommended, minimum 30. Coating that has exceeded its maximum recoat time should be checked for styrene or acetone sensitivity or uniformly scarified to assure secondary bonding. Consult Tnemec Technical Services and Technical Bulletin 22-119 R1.
Primers
Self-priming on steel or Series 1402 (for FDA food service), 1407. Note: For services above 180°F (82°C), do not use a primer.
Intermediate
Series 1422
Topcoats
Series 1432
Volatile Organic Compounds
EPA Method 24
0.41 lbs/gallon (49 grams/litre)
Theoretical Coverage
1,363 mil sq ft/gal (33.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Finish
Semi-gloss
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep
Support Documents
TB_99-18_Maintenance of Polymer Floor Coatings.pdf ProPolymer Flier (FLYPRO)