Hi-Build Epoxoline II
An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
This product is available in 512 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
22, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 72, 73, 84, 104, 113, 114, 141, 156, 157, 161, 175, 180, 181, 287, 446, 740, 750, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1077, 1078, 1080, 1081. Refer to COLORS on applicable topcoat data sheets for additional information. Note: The following recoat times apply for Series N69F: Immersion Service—Surface must be scarified after 30 days. Atmospheric Service—After 30 days, scarification or an epoxy tie-coat is required. When topcoating with Series 740 or 750, recoat time for N69F is 14 days. Contact your Tnemec representative for specific recommendations.
69.0 ± 2.0% (mixed) †
1,107 mil sq ft/gal (27.2 m²/L at 25 microns). See APPLICATION for coverage rates. †
Steel: Self-priming or Series 1, 27, 37H, 66, L69, L69F, N69, V69, 90E-92, 90G-1K97, 90-97, H90-97, 90-98, 91-H²O, 94-H²O, 135, 161, 394, 530
Galvanized Steel and Non-Ferrous Metal: Self-priming or Series 66, L69, L69F, N69, V69, 161
Concrete: Self-priming or Series 130, 215, 218
CMU: Self-priming or Series 130, 215, 218, 1254
Volatile Organic Compounds
Unthinned: 2.30 lbs/gallon (280 grams/litre)
Thinned 10% (No. 4 Thinner): 2.75 lbs/gallon (330 grams/litre)
Thinned 10% (No. 60 Thinner): 2.76 lbs/gallon (331 grams/litre)
Unthinned: 2.35 lbs/gal solids
Thinned 10% (No. 4 Thinner): 3.20 lbs/gal solids
Thinned 10% (No. 60 Thinner): 2.35 lbs/gal solids
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: The number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep