Series N69
Hi-Build Epoxoline II
Generic Type
Polyamidoamine Epoxy
Common Usage
An advanced generation epoxy formulated for the protection of steel, concrete, and ductile iron substrates. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals and concentrations. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
Special Qualifications
This product is part of a coating system tested in accordance with ISO 12944-6 (2018). Contact your Tnemec representative for coating system test results.
View more product detailsProduct Data Sheets
- English_Series_N69_Hi_Build_Epoxoline_Ii_pds.pdf
- French_Series_N69_Hi_Build_Epoxoline_Ii_pds.pdf
- Spanish_Series_N69_Hi_Build_Epoxoline_Ii_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 513 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Finish
Satin
Volume Solids
67.0 ± 2.0% (mixed) †
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
HAPS
Unthinned: 2.40 lbs/gal solids
Thinned 10% (No. 4 Thinner): 3.25 lbs/gal solids
Thinned 10% (No. 60 Thinner): 2.40 lbs/gal solids
Theoretical Coverage
1,074 mil sq ft/gal (26.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volatile Organic Compounds
Unthinned: 2.40 lbs/gallon (285 grams/litre)
Thinned 10% (No. 4 Thinner): 2.80 lbs/gallon (334 grams/litre)
Thinned 10% (No. 60 Thinner): 2.80 lbs/gallon (335 grams/litre)
Recommended DFT
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: The number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Primers
Steel: Self-priming or Series 1, 27, 37H, 66, L69, L69F, N69F, V69F, 90E-92, 90-97, H90-97, 90G-1K97, 90-98, 91-H₂O, 94-H₂O, 135, 161, 394
Galvanized Steel and Non-Ferrous Metal: Self-priming or Series 66, L69, L69F, N69F, V69F, 161
Concrete: Self-priming or Series 130, 1254
CMU: Self-priming or 130, 1254
Topcoats
Series 21, 22, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 73, 104, 113, 114, 118, 141, 156, 157, 161, 180, 181, 262, 265, 287, 435, 436, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1077, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: The following recoat times apply for Series N69: Immersion Service—Surface must be scarified after 60 days. Atmospheric Service—After 60 days, scarification or an epoxy tie-coat is required. Contact your Tnemec representative for specific recommendations.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep