A high-solids, lower VOC version of Tnemec’s proven polyamide epoxy technology for steel and concrete substrates. Fast-cure properties are ideal for shop and low temperature application. Certified for use on potable water tanks, pipes, and valves.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
215, 217, 218
78% ± 2.0% (mixed)†
1,248 mil sq ft/gal (30.7 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volatile Organic Compounds
Unthinned: 1.53 lbs/gal (184 grams/litre)
Thinned 10% (No. 4 Thinner): 2.02 lbs/gal (242 grams/litre) †
Number of Components
Two: Part A (epoxy) and Part B (polyamide)
Steel: Self-priming or Series 1, 20, FC20, 20HS, 91-H_2_O, 94-H_2_O, L140, L140F, N140, N140F, V140, V140F
Concrete: Self-priming, 20, 20HS
Interior: FC20, FC20HS, 22, FC22, L140, L140F, N140, N140F, V140, V140F, 264, 265, 406
Exterior: FC20, FC20HS, L69, L69F, N69, N69F, 72, 73, 113, 114, L140, L140F, N140, N140F, V140,V140F, 264, 265, 406, 700, V700, 701, V701, 740, 750, 1074, 1074U, 1075, 1075U, 1095.
Refer to COLORS on applicable topcoat data sheets for additional information. Note: When topcoating Series FC20HS, the following recoat times apply: with 264 or 265, 7 days; with Series 406, 740 or 750, 14 days; with 1095, 30 days; with itself, FC20, L69, L69F, N69, N69F, 113, 114, L140, L140F, N140, N140F, V140, V140F, 700, V700, 701 and V701, 60 days; with 72, 73, 1074, 1074U, 1075 and 1075U, 90 days. Scarify the Series FC20HS surface before topcoating if maximum recoat time has elapsed.
|Temperature||To Touch||To Handle||To Recoat||Immersion†|
|75°F (24°C)||1 hour||6 hours||7-8 hours||5 days|
|65°F (18°C)||2 hours||6-8 hours||8-10 hours||7 days|
|55°F (13°C)||3 hours||10-12 hours||14-16 hours||9 days|
|45°F (7°C)||5 hours||18-20 hours||22-24 hours||10 days|
|35°F (2°C)||6 hours||30 hours||36-40 hours||16 days|
† For water immersion only. Chemical storage will require additional cure time. Curing time varies with surface temperature, air movement, humidity and film thickness.
Ventilation: When used as a tank lining or in enclosed areas, provide adequate ventilation during application and cure.
2.0 to 10.0 mils (50 to 254 microns) per coat.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Unthinned: 1.15 lbs/gal solids
Thinned 10% (No. 4 Thinner): 1.87 lbs/gal solids
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep