Series 49

Multi-Purpose Epoxy

Generic Type

Modified Polyamine Epoxy

Common Usage

A high-solids, low VOC epoxy coating used for a multitude of primer and topcoat applications. The tough, abrasion-resistant film of Series 49 provides durable protection to concrete, CMU, and steel, and it is immersion grade, making it an excellent choice for non-potable service environments. Excellent adhesion properties allow for use on marginally prepared surfaces when blast cleaning is not possible.

View more product details

Theoretical Coverage

1,315 mil sq ft/gal (32.3 m²/L at 25 microns). See APPLICATION for coverage rates. †

Volatile Organic Compounds

EPA Method 24 †
Unthinned: 0.80 lbs/gallon (96 grams/litre)
Thinned 10% (No. 2 Thinner): 1.92 lbs/gallon (230 grams/litre)
Thinned 10% (No. 49 Thinner): 0.80 lbs/gallon (96 grams/litre)

Topcoats

Series 73, 1026, 1028, 1029, 1074, 1075, 1095
Note: When topcoating with Endura-Shield polyurethane topcoats, Series 49 has a maximum time to recoat of 60 days. If this time is exceeded, scarification or a Series 49 tie-coat is required before topcoating. Refer to appropriate topcoat data sheet for additional information.

Volume Solids

82.0 ± 2.0% (mixed) †

Number of Components

Two: Part A (amine) and Part B (epoxy)

Primers

Steel: Self-priming or Series 1, 90-97, 135, 394
Concrete or CMU: Self-priming or Series 215, 218, 1254, 130

Recommended DFT

4.0 to 10.0 mils (100 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.

HAPS

Unthinned: 1.60 lbs/gal solids
Thinned 10% (No. 2 Thinner): 2.50 lbs/gal solids
Thinned 10% (No. 49 Thinner): 1.60 lbs/gal solids

Curing Time

Temperature To Handle To Recoat Immersion
75°F (24°C) 6-10 hours 16-18 hours ‡ 7 days

Curing time varies with surface temperature, air movement, humidity and film thickness.
‡ Maximum recoat time with itself is 21 days. If more than 21 days have elapsed between coats of Series 49 the coated surface must be scarified before topcoating.

Finish

Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool

Close

Color Swatch packet

When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

Request swatch packet

Continue Exploring in the color tool

Close